RFI
[Top] [All Lists]

Re: [RFI] UPDATE re: Source power pole located - but wonder which compon

To: "'Michael Martin'" <mike@rfiservices.com>
Subject: Re: [RFI] UPDATE re: Source power pole located - but wonder which components most likely temperature sensitive
From: <charlie@thegallos.com>
Date: Sat, 3 Feb 2024 15:54:15 -0500
List-post: <mailto:rfi@contesting.com>
Nah, I’m buying the drone for OTHER reasons (Lost pet finding, help with SAR) – 
but was wondering if nosie fining would work.  I know others in the field who 
are doing power line inspections for the power company (HV Lines).  So it seems 
that for noise, basically useless – that is OK, was just a “It would be nice if 
it did”

 

From: Michael Martin <mike@rfiservices.com> 
Sent: Saturday, February 3, 2024 9:11 AM
To: charlie@thegallos.com
Cc: Lee STRAHAN <k7tjr@msn.com>; Rfi List <rfi@contesting.com>
Subject: Re: [RFI] UPDATE re: Source power pole located - but wonder which 
components most likely temperature sensitive

 

Charlie I'm sorry I don't have time to write I really thorough and long 
response to your post. However, if you're purchasing and I are camera for the 
use of Powerline noise you'll be wishing your money. It is not economically 
feasible. I have been out with many infrared camera sales people and Corona can 
people. I challenge them in a neighborhood that I don't frequent and I tell 
them to find every Source they can find in the neighborhood. I go out and I 
find every Power Line noise in the neighborhood. We spend a couple of hours 
doing this and come back and compare them. Rarely is there more than one source 
that are matching. Most power line noises are created by very small sparks. 
It's unfortunate as most amateur radio operators want to explain to the power 
companies that these are all catastrophic failures and due to a lack of 
maintenance. That is just not factual. The Sparks that create most of the power 
line noises do not create Heat because of the lack of current flow. Most 
sources are induced voltage into hardware near the primary conductor. As for 
ultrasound it works wonderful however it's direct line of sight capabilities 
inhibit finding a lot of the sources that are internal such as Lightning 
restors Arc through insulation and conductors and things like that. I read most 
of the input on this reflector and I wish I had time to comment on everything 
but I don't. I spend just about every day locating Powerline noise for power 
companies all over the country and I just can't find the time to reply to post 
that I'd like to because I'm too busy finding noise. I use ultrasound and RF 
every day I use the UE and the radar engineers. The radar Engineers is the best 
piece of equipment out there and in no way should anyone think they're going to 
find the average Source 200 ft away or even 60 ft away. The average power line 
noise from Hardware to ground is typically no more than about 50 ft. On the 
average! I find over 90% of my sources using ultrasound. Sometimes those 
sources are determined because I can't receive it with ultrasound and that 
helps to point toward the source as well as being able to hear it. And for red 
is not a good tool for finding Powerline resources. My experience does not come 
from taking a class and being certified. My experience comes from actually 
doing it and time and time again finding the source a lot of times repairing it 
myself to get a total understanding of why it happens as well as a lot of lab 
reconstruction.

 Best wishes to everybody.

 

Michael Martin
RFI Services
51 W Bay Front Rd
Lothian, MD 20711

240-508-3760
mike@rfiservices.com <mailto:mike@rfiservices.com> 
www.rfiservices.com <http://www.rfiservices.com> 

 

On Fri, Feb 2, 2024, 7:02 PM Charlie@thegallos.com 
<mailto:Charlie@thegallos.com>  <charlie@thegallos.com 
<mailto:charlie@thegallos.com> > wrote:

Now here is the question. I know they do IR surveys of the power lines (about 
to go for the class, yes I have my part 107)
Does anyone know if power line noise sources on the lower voltage stuff 
actually shows in IR? As I’m probably going to be buying a thermal drone 
(probably a M3T), might be a good tool to add
—  
Charlie
73 de KG2V
Http://www.thegallos.com


> On Feb 2, 2024, at 1:33 PM, Lee STRAHAN <k7tjr@msn.com <mailto:k7tjr@msn.com> 
> > wrote:
> 
>    Hi Charlie and all,
>  John Fluke company has some new equipment that senses IR and I believe they 
> add ultrasonic for their new remarkable sensor capable of use with power 
> lines.
> " https://www.fluke.com/en-us/products/thermal-cameras";
>     A bit on the spendy side. I remember their new product announcement 
> showing power line use but do not recall their specific product numbers.
>  Searching their site.
>  I Found this.  " 
> https://www.fluke.com/en-us/learn/blog/leak-detection/corona-discharge";   
> It's an ii900 from Fluke
> Lee K7TJR  OR.
> 
> 
> -----Original Message-----
> From: RFI <rfi-bounces+k7tjr=msn.com@contesting.com 
> <mailto:msn.com@contesting.com> > On Behalf Of Charles Gallo
> Sent: Friday, February 2, 2024 7:42 AM
> To: Rfi List <rfi@contesting.com <mailto:rfi@contesting.com> >
> Subject: Re: [RFI] UPDATE re: Source power pole located - but wonder which 
> components most likely temperature sensitive
> 
> I know HV lines are surveyed with drones in at least some locations. Usually 
> the company applies for a “beyond visual line of sight” (BVLOS) waver, and 
> they use drones with thermal imaging and CM accuracy for location
> --
> 73 de KG2V
> Charlie
> 
>> On Feb 2, 2024, at 10:28 AM, Alan Higbie <alan.higbie@gmail.com 
>> <mailto:alan.higbie@gmail.com> > wrote:
>> 
>> 
>> *I'M CURIOUS*:
>> 
>>  - Is there some new technology being used for surveying lines?  I sort
>>  of recall reading something like this. Drones? SDR recording?
>>  - Or, maybe this is just some guy driving around with his AM radio on?
>>  - Is there a new version of the ultrasonic dish that is better than the
>>  previous Radar Engineers model?
>>  - What is the difference between RE models and the MFJ-5008?
>> 
>> https://mfjen/
>> terprises.com <http://terprises.com> 
>> %2Fproducts%2Fmfj-5008&data=05%7C02%7C%7C416b4c251bef4ede
>> d11108dc24059682%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63842485
>> 3636490497%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzI
>> iLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=1y2NbTZ5VnjgayxM9A%
>> 2FBNgfhX%2FYWfplde66glt%2BDRhg%3D&reserved=0
>> 
>> I will further update when these tickets are closed out - and the
>> defective component is positively identified.
>> 
>> 73, ~ Alan K0AV
>> Colorado Springs
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com <mailto:RFI@contesting.com> 
>> http://lists/.
>> contesting.com <http://contesting.com> 
>> %2Fmailman%2Flistinfo%2Frfi&data=05%7C02%7C%7C416b4c251b
>> ef4eded11108dc24059682%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63
>> 8424853636498434%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV
>> 2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=q%2BXkzCHj1pp
>> z2JM5n%2FeK0oJOBbWt%2BI8TH9RmeYirw64%3D&reserved=0
> 
> 
> 
> _______________________________________________
> RFI mailing list
> RFI@contesting.com <mailto:RFI@contesting.com> 
> http://lists.contesting.com/mailman/listinfo/rfi



_______________________________________________
RFI mailing list
RFI@contesting.com <mailto:RFI@contesting.com> 
http://lists.contesting.com/mailman/listinfo/rfi

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
<Prev in Thread] Current Thread [Next in Thread>