--=====================_262042066==_.ALT
Content-Type: text/plain; charset="us-ascii"; format=flowed
At 12:30 11/12/2001, DieselCar@aol.com wrote:
>k7jj@arrl.net writes:
>
><<
> When CQ'ing (Run), I select the calling station with the mouse and the call
>populates the Callsign field. However, the cursor jumps to the RST field. If
>I hit Enter at this point I expect the call and rst to be sent. Instead the
>qsl/qrz message is sent.
>. . . .>>
>
>Dave,
>
>Try the following:
>1 - on WriteLog main window, click ENTRY
>2 - click ENTRY SENDS EXCH/QRZ
This is true , BUT the cursor jumps out of the Call field when you use the
mouse to select and enter the call,NOT GOOD, and now you have to use the
exchange key, not enter. It should wait for a space bar before it leaves
the call field as it does with a manual entry.
This is something that should be fixed as soon as possible. It is not
logical to work this way.
>When ENTER is hit wid the cursor is in the CALL window, it will send the
>exchange. That is, I have my exchange on F10. When the cursor is in any field
>other than CALL then F3 (%r%d TU GL QRZ? de W4UEF TEST%r%e) is sent. Since my
>exchange is on said keys then the following is in WRITELOG.INI:
>[Configuration]
>
>SendCallExchangeKey=10
>QrzFunctionKey=3
>
>Gud luck
> ue Rick W4UEF
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
Gil Baron http://members.home.com/gbaron
W0MN 44.08208 N 92.51263 W 1055'
"Baila como nadie te ve"
--=====================_262042066==_.ALT
Content-Type: text/html; charset="us-ascii"
<html>
At 12:30 11/12/2001, DieselCar@aol.com wrote:<br>
<blockquote type=cite class=cite cite>k7jj@arrl.net writes:<br><br>
<< <br>
When CQ'ing (Run), I select the calling station with the mouse and
the call <br>
populates the Callsign field. However, the cursor jumps to the RST field.
If <br>
I hit Enter at this point I expect the call and rst to be sent. Instead
the <br>
qsl/qrz message is sent. <br>
. . . .>><br><br>
Dave,<br><br>
Try the following:<br>
1 - on WriteLog main window, click ENTRY<br>
2 - click ENTRY SENDS EXCH/QRZ<br>
</blockquote><br><br>
This is true , BUT the cursor jumps out of the Call field when you use
the mouse to select and enter the call,NOT GOOD, and now you have to use
the exchange key, not enter. It should wait for a space bar before it
leaves the call field as it does with a manual entry.<br><br>
<br>
This is something that should be fixed as soon as possible. It is not
logical to work this way.<br><br>
<br>
<blockquote type=cite class=cite cite>When ENTER is hit wid the cursor is
in the CALL window, it will send the <br>
exchange. That is, I have my exchange on F10. When the cursor is in any
field <br>
other than CALL then F3 (%r%d TU GL QRZ? de W4UEF TEST%r%e) is sent.
Since my <br>
exchange is on said keys then the following is in WRITELOG.INI:<br>
[Configuration]<br><br>
SendCallExchangeKey=10<br>
QrzFunctionKey=3<br><br>
Gud luck<br>
ue Rick W4UEF<br>
_______________________________________________<br>
WriteLog mailing list<br>
WriteLog@contesting.com<br>
<a href="http://lists.contesting.com/mailman/listinfo/writelog";
eudora="autourl">http://lists.contesting.com/mailman/listinfo/writelog</a></blockquote>
<x-sigsep><p></x-sigsep>
<font face="Courier New, Courier">Gil Baron
<a href="http://members.home.com/gbaron";
eudora="autourl">http://members.home.com/gbaron</a><br>
W0MN 44.08208 N 92.51263 W 1055'<br>
"Baila como nadie te ve" <br>
</font></html>
--=====================_262042066==_.ALT--
|