TRLog
[Top] [All Lists]

Re: [Trlog] SSB SO2R with a DVK?

To: George Fremin III <geoiii@kkn.net>
Subject: Re: [Trlog] SSB SO2R with a DVK?
From: kd4d@comcast.net
Date: Mon, 12 Jan 2004 20:49:18 +0000
List-post: <mailto:trlog@contesting.com>
Hi George:

There isn't an existing way for this DVK to tell TR Log when it
quits sending.  And, TR does know when the DVP quits.

It appears I do understand how this works now.  Thanks!  The
only thing I can think of right now would be to tell TR Log 
how long the messages are, which would be a pain, but I don't 
know if that would really work.

Thanks again.  GREAT SUPPORT!  :-)

73,

Mark, KD4D

> On Mon, Jan 12, 2004 at 08:39:09PM +0000, kd4d@comcast.net wrote:
> > Hi George:
> > 
> > To make this clearer, in NAQP, I think I can configure the
> > DVP to allow me to make an S&P QSO on the second radio and
> > continue to CQ on the first radio without saying ANYTHING,
> > using the same keystrokes as CW.  (ALT-D, call, return, 
> > space, enter exchange, return (I think) and I'm back on 
> > the first radio).
> 
> Yes - that may be true since I think TR-Log 
> knows when the DVP stops transmitting but 
> it has been so long that I am not sure.
> 
> > 
> > I don't see how to do this (yet) with the DVK.  The 
> > actual box I'm looking at is an external DVK, driven off
> > of the serial port.
> 
> You might be able to do this with a DVK provided it 
> had a way to tell TR-Log it was finished and also 
> TR-Log know how to read this signal from the DVK.
> 
> But right now there is no way for a DVK like the W9XT 
> device to signal TR-Log that it has finished sending.
> 
> 
> -- 
> George Fremin III - K5TR
> geoiii@kkn.net
> http://www.kkn.net/~k5tr
> 
> 
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>