Towertalk
[Top] [All Lists]

Re: [TowerTalk] microHAM ARCO and the OR2800 Orion: Good combo?

To: al.n6ta@gmail.com, towertalk@contesting.com
Subject: Re: [TowerTalk] microHAM ARCO and the OR2800 Orion: Good combo?
From: JOHN OWENS <ham38john@comcast.net>
Date: Tue, 12 Dec 2023 09:34:15 -0800 (PST)
List-post: <mailto:towertalk@contesting.com>
Al:

I have been using the ORION 2800 AC rotator for many years, and had to replace 
the controller (M SQ) as it failed as it had often in the past. I am currently 
using the Green Heron RT-21 Controller as it was recommended as my solution, 
and I have been very pleased with it. Very simple to configure it. 

I have no knowledge of the ARCO controller, but plan to stick with my Green 
Heron Controller. For me, it has been the right choice. I am turning a HyGain 
TH-11, a 5 el 6M beam,  and a Cushcraft 2 el 40M beam with it. Bought it used 
about 5 years ago, and it has been doing a great job since then. Found the used 
one on eHam.net. -  John Owens - N7TK




> On 12/11/2023 4:39 PM PST al.n6ta@gmail.com wrote:
> 
>  
> Santa may be visiting me this year and bringing an ARCO controller to work
> with my year old OR2800  (DC motor).  I cannot find any specs o the drive
> current to the OR2800 motor or maximum power needed by the motor to turn my
> mast.  The ARCO has a high power option for the power supply that I doubt I
> need but would appreciate any comments.  I also doubt that having a lot of
> overhead power available would help turn a mast that has some kind of
> friction issue.
> 
> My antenna is a DB36/80 that is 2 feet above the bearing on the top of the
> DX-70 Tash tower.  The rotor is about 7 been down from the tower top and the
> mast is attached with a K7NV clamp and 'I think' the mast is resting on the
> bottom of the clamp, not being partially supported by the bearing.
> 
> I am currently using a GH RT21 to control the rotor and it has worked well
> but I am currently experiencing a problem that is yet to be resolved.  I
> will detail that in a separate posting.  Though I doubt the controller is a
> root cause of my intermittent ability to turn the antenna, I would like a
> general shack upgrade 'because I deserve it'. 
> 
> So, if anyone thinks a high power option for my simple antenna is useful, I
> would like to know and why.
> 
>  
> 
> Thanks es 73,
> 
> Al  N6TA
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>