TenTec
[Top] [All Lists]

Re: [TenTec] Using an Argosy in the field

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] Using an Argosy in the field
From: "Rick - DJ0IP / NJ0IP" <Rick@DJ0IP.de>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 4 Apr 2012 08:16:18 +0200
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
John,

The link didn't work for me, so I googled it and found another page.
Dunno if it is the same, but I think it is.
http://ad5yu.wordpress.com/2007/01/07/ad5x-portable-vertical-antenna/ 

My comments are based on the risky assumption that this is the same antenna
you are thinking about!

It's a 10' whip with a center loading coil.

It's gonna work pretty well on the high bands, but it won't be so great on
the low bands.
For mobile we have a legal limit for the length (I think 10'), but why would
you want to limit the height of a portable antenna to just 10' and then add
a lossy coil?
Even on 20m the quarter wave is 16'.

Maybe I'm biased because most of my operations is on 40m and that antenna
just is not going to be a great 40m antenna.

I much prefer the telescoping fiberglass pole method.  They go up and down
in less than one minute.  You can have a full size 40m vertical (33')
without even having to guy it (if it is only temporary).  Just have separate
quarter wave wires for each band you want to operate.

In fact for 40m, since daytime operation is more close in operations, run
your 33' of wire only half way up a pole, then slope it back towards the
ground as if it were one half of an inverted vee.  Tie it to a ground stake
about 20' away.  Now you will have a MUCH stronger signal for NVIS type of
work.

NOW for low bands, Phil has put forth some outstanding suggestions for
matching 43' verticals on 80 and 160. His suggestions here are some of the
best I've ever seen.

FINALLY, I started out in the early 1970's using home-brew mobile whips with
coils in the middle.  Once I switched to the long fishing poles (now days,
there are much better purpose-made poles for ham radio), I never looked
back.  There is a huge difference.  

The old adage, make your wire higher and longer is still true (in general).

73
Rick, DJ0IP

-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of John
Sent: Wednesday, April 04, 2012 12:03 AM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Using an Argosy in the field

John,

My current plan is to build a vertical that can collapse into short
sections.  It is a design by Phil Salas - AD5X and uses a 10 ft telescoping
whip at the top and covers 60-10 meters, without a tuner.  I have had good
luck with verticals and even though this is a 1/4,  with some radials I
think I will be in good shape  I placed the address of the article  at the
bottom of this note if you are curious.

Also planned is the acquisition of a light sealed battery probably about
7 ah.  The Argosy can run from 5-50 watts so it gives me some play room.
And hopefully my choice of battery size will not be too limiting.



John / WA1JG

http://www.ad5x.com/images/Articles/VerticalRevH.pdf

On 4/3/2012 4:49 PM, John Peters wrote:
>
> Sent from my iPhone
>
> On Mar 28, 2012, at 5:21 AM, "Rick - DJ0IP / NJ0IP"<Rick@DJ0IP.de>  wrote:
>
>> John,
>>
>> The lynchpin to having a good signal when operating low power 
>> portable, is a good antenna.
>> Some people take a great rig, run it at reduced power on a crappy 
>> antenna (i.e., mobil whip mounted to a ground stake), and wonder why 
>> they don't work anybody.
>>
>> Wire can be a wonderful antenna, but you have to get it up high in the
air.
>> That's why I always took a telescoping fiberglass pole with me.
>> In the early days they were just 8m long.
>> Later there were some purpose-built poles for ham radio that were 10m
long.
>> Today you can get them in even stronger quality in lengths of 12m or 18m.
>> In fact they even come as long as 26m but that's a bit overkill for a 
>> one-man expedition.
>>
>> For Field Day I always ran a doublet, with each leg 13m long, and fed 
>> with
>> 300 Ohm Openwire.
>> I had a tiny little MFJ Matchbox (T-filter), with a built in Balun.
>> The Balun was great for 5w QRP or 20w, etc., but I burned it up 
>> running 100w.
>> Had to re-build it, then never tried 100w with it again.
>>
>> For my normal excursions I had a special lightweight 3-band dipole:
>>
>> - made of thin Teflon-insulated stranded copper wire (I guess about 
>> AWG 22 or so)
>> - cut for 20m, insulator, more wire for 40m
>> - 2x short jumpers for jumping the insulator between 20m and 40m 
>> segments, for 40m operation
>> - 2x short stubs with alligator clips to extend the antenna for 15m 
>> operation (6 inches on each end)
>> - fed with about 50' of RG-174  (YES, THE THIN STUFF).
>> - A ball of twine for tying off the ends
>>
>> Twine was cheap and disposable if it got too tangled.  Ends tied off 
>> to trees, or if nothing else, simply to stakes in the ground.
>>
>> The thin RG-174 is sufficient and loss is really not bad for short 
>> runs at those frequencies.  The loss is worse if you use heavier 
>> coax, and then fail
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>