It’s a Flex6300.
Nothing has changed in the shack since the day I got it, and through the
winter, 40 meters was in pretty constant use, and was working well until around
a month ago, when this interference showed up. I’ve done everything locally
except for turning the entire house off. Which is a little difficult to do with
the 6300 because it runs through the house router and has a computer attached.
I also see the interference on a little RXTX ensemble I built that I use
outside the house. That might be the ticket for turning off house power, since
I can run the RXTX off a battery, and same with the laptop attached to it.
-73 de Mike N3LI -
> On Aug 31, 2015, at 4:00 PM, Jim Brown <jim@audiosystemsgroup.com> wrote:
>
> On Fri,8/28/2015 11:59 AM, Michael Coslo wrote:
>> I have an RFI Problem, on 40 meters. Using a FlexRadio
>
> What model of Flex Radio? Any electronics between antenna and radio? It
> might be that some electronic stage is getting overloaded by out of band
> signals. Do you see/hear anything like this when you tune far outside the
> bands?
>
> I don't know Flex Radios at all, so others would have to provide more
> specific advice relating to the radio. I do recall though that older and/or
> lower cost models lack a pre-selector or tuned front end, making their input
> (A/D?) more susceptible to overload.
>
> 73, Jim K9YC
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|