1-1 of 1 messages
|
Page 1 of 1
|
Com Port Usage
|
Reply
|
by W2LK on February 15, 2001
|
Mail this to a friend!
|
Hi All,
I am trying to get WL set for this weekend. I am using a 4 port Byte Runner board starting at Com 5 so I have Com 1-2 and 5-8 set up. I am using a PK232 for keying, all of which I have had running in another configuration so I know it all works.
I need to have the PK232 keying on Com 5 and I have an entry in writelog.ini for CommSlot3=5. I also have Com 5-8 defined in the .ini file. When WL starts, I get a "Com Port Not Available" message. The Setup menu shows Com 5 in the third slot like it should but it won't let me use the port.
I tried the RTTY window on Com 5 and it initialized the PK232 correctly so the port is connected and working.
Any ideas on what I am missing and/or should try?
TIA.
73, Les
|
|
|
Email Subscription
You are not subscribed to this topic.
Subscribe!
My Subscriptions
Subscriptions Help
Check our help page for help using
Forums, or send questions, comments, or suggestions to the
Forums Manager.
|