eHam Logo

Community
 Home
 eHam.net Home
 Articles & Stories
 Contesting Wiki
 Speakout
 Strays
 Survey
 My Profile

Resources
 This Week's Contests
 Classified Ads
 Contest Links
 Product Reviews



Contest Lists
 3830
 CQ-Contest
 CT-User
 NA-User
 SD-User
 TRLog
 VHFcontesting
 WriteLog

Other Lists
 Amps
 AntennaWare
 Propagation
 RFI
 RTTY
 TenTec
 TopBand
 TowerTalk
 Yaesu

 Mailing List FAQs


Site Information
 About This Site
 Contesting.com Team

Contesting Online Forums : TowerTalk : Rotors and parts Forums Help

1-4 of 4 messages

  Page 1 of 1  


Rotors and parts Reply
by K8RI on March 11, 2001 Mail this to a friend!
I'm installing an antenna system on a Rohn 45G. The bottom rotor is a HyGain HDR600, but I have a Wilson WR-1000 that has been setting out in the shop for years and has never been used. Unfortunately the manual and the 10 pin connector for the rotor have been lost.

I need to find a connector and manual, (or at least a schematic) in place of the manual.

The antennas are, or will be mounted on concentric steel masts (0.25 wall)

The UHF/VHF antennas are on the inner mast, while the HF beam will be just above the top of the tower on the outer mast.

I plan on using a HyGain HDR 600 to drive the outer mast and was thinking about using the WR-1000 for the center mast.

Any help finding the connector and a diagram (or manual)would be appreciated.

Thanks,
Roger (K8RI)
 
RE: Rotors and parts Reply
by K2TR on July 2, 2001 Mail this to a friend!
Hi Roger;

The only schematic that I've ever seen for a Wilson WR-1000 was printed on the back of the control box. Wilson rotors, while quite robust, cannot be easily repaired as the gears are not standard parts.

It seemed to me that the directional controls on the WR-1000 control box were wired in such a way that you could drive the rotor while the brake was engaged. A simple change to cause no power to the motor unless the brake is disengaged may allow for extended life of the rotor.

73, Fred
 
RE: Rotors and parts Reply
by n7bt on May 13, 2010 Mail this to a friend!
I have what I believe to be a Wilson Rotor and Controll, appears to be complete. Just put a need help ad on qth.com. would you please take a look at the ad and let me know what you think it is?
Thanks
Don
N7BT

http://swap.qth.com/view_ad.php?counter=825619
 
RE: Rotors and parts Reply
by KC9MYG on January 11, 2011 Mail this to a friend!
If you want to, give me a call at 920-376-6814 anytime. I have a complete manual with schematic wiring diagram as well as an exploded view and a parts list for the Wilson WR-1000 rotor. It also shows how towire the control box to the rotor as well along with the pinoutsfor each plug. Feel free to call me anytime before 10:00PM.
 

  Page 1 of 1  

 
Next Topic:   Guyed vs. Self Supporting
Previous Topic:   attic antennas, stealth, roof tiles
Email Subscription
You are not subscribed to this topic.

Subscribe!
My Subscriptions
Subscriptions Help


Search TowerTalk:

Check our help page for help using Forums, or send questions, comments, or suggestions to the Forums Manager.