eHam Logo

 Home Home
 Articles & Stories
 Contesting Wiki
 My Profile

 This Week's Contests
 Classified Ads
 Contest Links
 Product Reviews

Contest Lists

Other Lists

 Mailing List FAQs

Site Information
 About This Site Team

Contesting Online Forums : TowerTalk : Yaesu G-1000DXA Rotator Forums Help

1-1 of 1 messages

  Page 1 of 1  

Yaesu G-1000DXA Rotator Reply
by NW7E on January 13, 2003 Mail this to a friend!
I've used my G-1000DXA for about 5 months with no problems with a LightningBolt 2 element quad. Now the rotator only turns back and forth about 20 degrees and pulses back and forth when it reaches the end that it can rotate using the preset button. I've checked the thrust bearing on the tower and it is not bound up. Does anyone know what voltages I should see on the six pin output connector on the control box when it is working correctly? I'm about to have to climb the 60 foot tower and take it down. Any ideas as to what might have gone wrong? Both fuses in control box are ok too.

  Page 1 of 1  

Next Topic:   Yaesu G-800S Rotor Control Axial Lamp
Previous Topic:   Manual for Pro-67C
Email Subscription
You are not subscribed to this topic.

My Subscriptions
Subscriptions Help

Search TowerTalk:

Check our help page for help using Forums, or send questions, comments, or suggestions to the Forums Manager.