1-1 of 1 messages
|
Page 1 of 1
|
Yaesu G-1000DXA Rotator
|
Reply
|
by NW7E on January 13, 2003
|
Mail this to a friend!
|
I've used my G-1000DXA for about 5 months with no problems with a LightningBolt 2 element quad. Now the rotator only turns back and forth about 20 degrees and pulses back and forth when it reaches the end that it can rotate using the preset button. I've checked the thrust bearing on the tower and it is not bound up. Does anyone know what voltages I should see on the six pin output connector on the control box when it is working correctly? I'm about to have to climb the 60 foot tower and take it down. Any ideas as to what might have gone wrong? Both fuses in control box are ok too.
|
|
|
Email Subscription
You are not subscribed to this topic.
Subscribe!
My Subscriptions
Subscriptions Help
Check our help page for help using
Forums, or send questions, comments, or suggestions to the
Forums Manager.
|