eHam Logo

 Home Home
 Articles & Stories
 Contesting Wiki
 My Profile

 This Week's Contests
 Classified Ads
 Contest Links
 Product Reviews

Contest Lists

Other Lists

 Mailing List FAQs

Site Information
 About This Site Team

Contesting Online Forums : Tips : Stacking 10 Meter Monobanders Forums Help

1-3 of 3 messages

  Page 1 of 1  

Stacking 10 Meter Monobanders Reply
by ve4mm on December 31, 2002 Mail this to a friend!
Does anyone know how to stack 2 or more Hy Gain 105CA, 5 element 10 Meter beams?


RE: Stacking 10 Meter Monobanders Reply
by k0sn on January 1, 2003 Mail this to a friend!
Simply space them about one half wave apart and feed in-phase (using equal lengths of coax). If you use one of the commercially made switches, you will have more flexibility, as you will be able to feed either of the antennas by itself or both together.
Good luck.
Tom K0SN
RE: Stacking 10 Meter Monobanders Reply
by W4ZV on January 3, 2003 Mail this to a friend!
I would stack them at least 25-30' apart. I use 3 KLM 610's which are on slightly longer booms (27.5' versus 24') and they work well with 35' spacing. I believe the Hy Gain antennas use baluns so be careful that they are both polarized the same way. I used YO7 to optimize the dimensions of mine in a stack and you can see the difference here:

73, Bill W4ZV

  Page 1 of 1  

Next Topic:   Avanti PDL 2 on 15 metres
Previous Topic:   M/M station setup
Email Subscription
You are not subscribed to this topic.

My Subscriptions
Subscriptions Help

Search Tips:

Check our help page for help using Forums, or send questions, comments, or suggestions to the Forums Manager.