1-3 of 3 messages
|
Page 1 of 1
|
Stacking 10 Meter Monobanders
|
Reply
|
by ve4mm on December 31, 2002
|
Mail this to a friend!
|
Does anyone know how to stack 2 or more Hy Gain 105CA, 5 element 10 Meter beams?
Thanks,
Mike
|
|
RE: Stacking 10 Meter Monobanders
|
Reply
|
by k0sn on January 1, 2003
|
Mail this to a friend!
|
Mike:
Simply space them about one half wave apart and feed in-phase (using equal lengths of coax). If you use one of the commercially made switches, you will have more flexibility, as you will be able to feed either of the antennas by itself or both together.
Good luck.
Tom K0SN
|
|
RE: Stacking 10 Meter Monobanders
|
Reply
|
by W4ZV on January 3, 2003
|
Mail this to a friend!
|
I would stack them at least 25-30' apart. I use 3 KLM 610's which are on slightly longer booms (27.5' versus 24') and they work well with 35' spacing. I believe the Hy Gain antennas use baluns so be careful that they are both polarized the same way. I used YO7 to optimize the dimensions of mine in a stack and you can see the difference here:
http://users.vnet.net/btippett/yagi_optimizer_7_0.htm
73, Bill W4ZV
|
|
|
Email Subscription
You are not subscribed to this topic.
Subscribe!
My Subscriptions
Subscriptions Help
Check our help page for help using
Forums, or send questions, comments, or suggestions to the
Forums Manager.
|