1-3 of 3 messages
|
Page 1 of 1
|
KENWOOD TS-120
|
Reply
|
by EA5BM on August 6, 2005
|
Mail this to a friend!
|
Hi there
Not sure if this is the adecuate forum, but:
I have installed recently a YK88-C filter (500 hz cw) in my TS-120V and no works.
Must I do some thing else?. I have only soldered the filter but no bridges cuted, no microswitch, NOTHING more.
The users manual, has no instruction about the installation.
Any news?
Thanks in advance
Juan
|
|
RE: KENWOOD TS-120
|
Reply
|
by n7geb on August 12, 2005
|
Mail this to a friend!
|
Juan, there is a jumper on the side of the YK-88c that needs to be moved from one position to another wen you install a YK-88c. Looking at the bottom of the rig from the front , the jumper is to the left of the filter, and it needs to be moved down to the next set of connectors. The jumper is white, has two connection wires, and is not soldered. Anyone with a TS-120 owner's manual could explain it better.
|
|
|
Email Subscription
You are not subscribed to this topic.
Subscribe!
My Subscriptions
Subscriptions Help
Check our help page for help using
Forums, or send questions, comments, or suggestions to the
Forums Manager.
|