Yaesu
[Top] [All Lists]

[Yaesu] FT-840 Power Cord Connector Wiring

To: <yaesu@contesting.com>
Subject: [Yaesu] FT-840 Power Cord Connector Wiring
From: ki0dz@space.com (ki0dz@space.com)
Date: 15 Jun 2001 12:03:25 -0700
On Fri, 15 June 2001, Peter Hodgson wrote:

> my 840 is connected as follows: looking at the rear of the connector on the 
> cable
> 
>  CLIP
>     -    +
> O O O    centre pin is squared
>      -  +
> O O O outer pins are squared
> 
> hope that helps
   Yes, I think it does.  Thanks!  However, I'm wondering if it's just a simple 
case of jumpering over to make two positives and two negatives.  My only other 
real experience with a Yeasu HF rig is the 757 and I know that with that there 
is the normal positive and negative terminals, and the other two are merely 
jumpered together with no other connection to power.  So, if it's just a case 
of splitting/jumpering to make two positives and two negatives, I'm a little 
confused by the simplicity. :-)
                                                                                
               73, Mary-Frances
Mary-Frances Bartels  ***  ki0dz@qsl.net       (((#)))   ^     ^
http://www.qsl.net/ki0dz   Denver, CO             |       ^ - ^
Order Watkins Products www.watkinsonline.com   -------    (o o)
Beyond Infinity - WWW Services    ^#092389^    |ooOoo|  >{  |  }<
http://members.nbci.com/beyondin               -------         RRR)*

___________________________________________________________________
Join the Space Program: Get FREE E-mail at http://www.space.com.

--
FAQ on WWW:               http://www.contesting.com/FAQ/yaesu
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com


<Prev in Thread] Current Thread [Next in Thread>