WriteLog
[Top] [All Lists]

Re: [WriteLog] Can't get Rttyrite CW to send CW via F-Key's

To: writelog@contesting.com
Subject: Re: [WriteLog] Can't get Rttyrite CW to send CW via F-Key's
From: Steve Nordahl via WriteLog <writelog@contesting.com>
Reply-to: Steve Nordahl <ns3l@yahoo.com>
Date: Wed, 17 Jun 2020 11:18:05 +0000 (UTC)
List-post: <mailto:writelog@contesting.com>
 I want to thank you all for getting back to me with your comments.. 
Inadvertently, I failed to mention that this did in fact work in the past.. Let 
me explain..

I've been using Writelog now for 7 years. I originally set it up and tied it 
together using MMTTY and the MMTTY Plug in. During that time I worked plenty of 
RTTY & CW contests and was able to send the preprogrammed messages in Writelog. 
Flawlessly... So let me say this, I may have erred in my initial question about 
Rttywrite doing the F-key transmission in CW mode. I should have acknowledged 
that Writelog, along with using Rttyrite to read & I believe MMTTY's plug in 
was handling the F-Key Message Tx'ing. What I was using up until I think late 
last year was MMTTY's plug in, At some point I read that their plug in was no 
longer supported and I had to convert to use XMMT. I can't remember when I 
noticed the break, but by coincidence when I switched to XMMT the problem with 
the CW F-keys started. Jim K0XU mentioned in one comment that it did work. If 
not taking him out of context I have to believe that 100 percent. I know.. It 
worked in the past so what has changed? Also, this is not about what reader 
works best, that's everyones choice.. I agree the Writelog CW reader works fine 
and may be better for some, but it scrolls to fast for me. I like how 
Rttyrite's highlighting of the calls that Rttyrite does. To me it's more 
simplified one click and I can work it... The reader in Rttyrite works fine and 
with my old eyes makes things more productive for me. So, can I go back and 
still use MMTTY's plug in? Is this where the break occurred? Do I really need 
XMMT?

Steve Nordahl, NS3L     On Tuesday, June 16, 2020, 10:41:05 AM EDT, Steve 
Nordahl <ns3l@yahoo.com> wrote:  
 
 Hi all.. I have a ongoing problem.. When using Rttyrite in Writelog, it works 
fine in FSK RTTY. It sends and hears RTTY no problem. The F-keys are also 
sending no problem.

My issue is when I go to do CW. Rttyrite in Sound Board AFSK and CW mode 
receives fine. However, if I hit any of the programmed F-keys nothing 
happens..!! It does not key the rig..

Has anyone else had this occur? How do I get Rttyrite to send CW messages via 
the F-keys?

Equipment is as follows. Win 10 laptop, Icom IC-7000, microHam MK II, Writelog 
V12.50H

Hope someone can unravel this for me..

Steve NS3L  
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
<Prev in Thread] Current Thread [Next in Thread>