WriteLog
[Top] [All Lists]

Re: [WriteLog] Cabrillo Creation for ARRL 10M Contest -- DX Side

To: <writelog@contesting.com>
Subject: Re: [WriteLog] Cabrillo Creation for ARRL 10M Contest -- DX Side
From: "al9a" <al9a@mtaonline.net>
Date: Mon, 24 Dec 2012 14:31:37 -1000
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Scott,

I believe you have to make a change to your writelog.ini file to establish
that you are operating as a DX station.  I believe the section below from
the Help manual covers your circumstance.

Setting your DXCC country
The point value and multipliers are calculated assuming your station is
located in the DXCC country indicated by an entry in WRITELOG.INI, You can
modify the CALLPREFIX line in the [Multipliers] section in WRITELOG.INI in
your Windows directory (normally c:\windows). The value must be the prefix
of the country of operation, all upper case. If the prefix by itself does
not determine the country of operation, then also add a PREFIX_XTRA value
which is the letter that you would enter in the C field (see previous
section) to specify which country. For example, if you are operating as
CE0DX from Easter Island, you would modify (or add) a section to
WRITELOG.INI that looked like this:

[Multipliers]
CALLPREFIX=CE0
PREFIX_XTRA=E

WriteLog automatically sets this INI entry using your callsign when you
install the software. But if you are on a Dxpedition you will want to change
the INI entry manually.

73,
Gary AL9A


--------------------------------------------------
From: "(K7ZO) Scott Tuthill" <k7zo@cableone.net>
Sent: Monday, December 24, 2012 6:19 AM
To: <writelog@contesting.com>
Subject: [WriteLog] Cabrillo Creation for ARRL 10M Contest -- DX Side

I operated as YN5ZO in the ARRL 10 Meter contest using 11.07 as registered
to my home call, K7ZO.  I am trying to create the Cabrillo file and can
not get it to put my sent serial number into the file. The Contest |
Parameter Setup screen only allows you to enter a State. If I enter DX
then the Cabrillo generator just puts "DX" into the file. What's the
trick?

Scott/K7ZO


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>