WriteLog
[Top] [All Lists]

Re: [WriteLog] wlog and usb to serial adapter

To: Mike McIlheran K0MWM <k0mwm@comcast.net>, "[WriteLog]" <WriteLog@contesting.com>
Subject: Re: [WriteLog] wlog and usb to serial adapter
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Tue, 30 Aug 2011 17:35:09 -0400
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
FTDI is a chip house - many of OEMs use the FTDI chip set.  The chipset
is generally given in the specification (read the fine print <G>).  One
vendor I know of that specifies the chip set is  Byterunner - they have
USB to serial converters using either FTDI or Prolific chip sets and
devices with 1, 2, 4 or 8 ports.  See:
  http://www.byterunner.com/byterunner/new_frontpage=usbserialadapters

Byterunner may not be the low price source but they are a known entity.

73,

    ... Joe, W4TV


On 8/30/2011 4:24 PM, Mike McIlheran K0MWM wrote:
> I have been unable to use WL too and ironically have the TrendNet TU-S9
> adapter as well. Who carries the FTDI versions and what are some good
> brands?
> Mike (K0MWM)
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Joe Subich, W4TV
> Sent: Sunday, August 28, 2011 7:57 PM
> To: k2mme@juno.com; [WriteLog]
> Subject: Re: [WriteLog] wlog and usb to serial adapter
>
>
> Sounds like the Trendnet adapter uses the Prolific chipset which is known to
> have defective drivers with Windows 7.  I suggest you look for updated
> drivers as the latest drivers are reported to resolve the timing issues with
> certain software.
>
> Either that or get a different adapter that uses the FTDI chip set.
> The FTDI drivers are (and have been) rock solid with all versions of
> Windows.
>
> 73,
>
>      ... Joe, W4TV
>
>
>> ----- Original Message -----
>> From:<k2mme@juno.com>
>> To:<WriteLog@contesting.com>
>> Sent: Sunday, August 28, 2011 7:34 PM
>> Subject: [WriteLog] wlog and usb to serial adapter
>>
>>
>>> Hi
>>> I just moved to a windows 7 machine and am using a Trendnet TU-s9 usb
>>> to serial adapter. I works ok with both Win-Eqf and HRD but not with
>>> Writelog. I tried a lot of different port  settings but to no avail.
>>> Has anybody gone through this and what did you do to solve this?
>>> Howie  K2MME
>>>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>