WriteLog
[Top] [All Lists]

Re: [RTTY] MMTTY and EXTFSK at 75 baud...

To: <rtty@contesting.com>, <writelog@contesting.com>
Subject: Re: [RTTY] MMTTY and EXTFSK at 75 baud...
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
Date: Sun, 6 Jun 2010 09:51:32 -0500
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
After further testing, the microham microkeyer will diddle at 75 baud but 
timing appears off to the point where it does not send 75
baud intelligently.

73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com 

-----Original Message-----
From: writelog-bounces@contesting.com [mailto:writelog-bounces@contesting.com] 
On Behalf Of Don Hill AA5AU
Sent: Sunday, June 06, 2010 9:05 AM
To: rtty@contesting.com; writelog@contesting.com
Subject: Re: [WriteLog] MMTTY and EXTFSK at 75 baud...

Thanks for the valuable information Bob!  WriteLog users have an option 
available that does not use the MMTTY plug-in.

I have confirmed that the MMTTY Plug-in for WriteLog will not work on 75 Baud, 
this includes with or without using
Software-generated FSK.

However, you CAN use the Soundboard FSK (and Soundboard AFSK) option under TU 
Type in Rttyrite to transmit and receive 75 baud IF
you DON'T normally use Software-generated FSK.  Soundboard FSK (or Soundboard 
AFSK) is WriteLog's built-in soundboard decoder with
it's own tuning indicator.  I used this decoder for years before MMTTY came 
about and this decoder is very good.

I tested the Soundboard FSK generator using a standard legacy COM port to a 
homebrew transistor FSK interface and using a virtual
COM port with my Microham microkeyer and both appeared to transmit 75 baud 
fine.  This means that if you use a Rigblaster or any
other type of commercial interface to generate FSK on a standard legacy COM 
port, you can use the Soundboard FSK (or AFSK) TU option
in WriteLog.

But if you normally use Software-generated FSK with WriteLog to send RTTY, you 
will not be able to send 75 baud.  Software-generated
FSK was designed for 45 baud only.

I agree with Bob in that if you plan on participating in the 75 baud contests, 
try your alternative set up ahead of time.

Thanks again to Bob for bring this up.  I will update rttycontesting.com today 
with this information and maybe a tutorial on how to
use the Soundboard FSK (or AFSK) option with WriteLog.  But it's should work 
just fine.  Just go to the TU Type menu in Rttyrite and
choose "Soundboard FSK" (or AFSK if you are running AFSK).  I should be around 
today if you have any questions or concerns, shoot me
a direct reply.

73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com 

-----Original Message-----
From: writelog-bounces@contesting.com [mailto:writelog-bounces@contesting.com] 
On Behalf Of Robert Chudek - K0RC
Sent: Saturday, June 05, 2010 11:04 AM
To: N1MMLogger@yahoogroups.com; cq-contest@contesting.com; rtty@contesting.com; 
writelog@contesting.com; MMTTY@yahoogroups.com
Subject: [WriteLog] MMTTY and EXTFSK at 75 baud...

This is a FYI message...

Operators planning to participate in the 75 Baud contests this weekend and next 
should be aware IF they are using the popular EXTFSK
driver, this driver is hard coded to transmit at 45.45 Baud. Typically this 
driver is used to generate FSK & PTT keying (not AFSK)
by RTTY software, MMTTY in particular.

Dave Bernstein, AA6YQ, verified this (documented) limitation. He maintains the 
MMTTY source code.

How do you know whether you are using the EXTFSK driver? Bring up your software 
configured for a RTTY contest. Look at the bottom of
the screen to see if there is an EXTFSK 1.05 button displayed on the Windows 
task bar. If it is shown, you are using the driver and
will only be able to transmit at 45.45 Baud.

There are many other RTTY packages that will allow 75 Baud TX speeds. If you 
were planning to participate in high speed RTTY, it
would be a good time to investigate other options if you are currently using 
the EXTFSK driver.

73 de Bob - KØRC in MN
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>