Thanks to Wayne, W5XD, quick response my problem was fixed. It seems that
the set up was keying the wrong rig with CW. The following is a brief recap:
When I sat up 10.64 after the crash [see message below], I did NOT change
any of the multi keyer connections and/or cables. I do not run SO2R. The PTT
worked and no cw were a result.
I just check the rig to keyer cable. They were okay. Then I swapped the
key line from LEFT to RIGHT and everything works great.
My sincere thanks to Wayne for his quick help and others for their inputs.
All are appreciated and I hope that this may help someone else in the process
of recovering from a computer crash/lock up.
Thanks again.
Merry Christmas.
73
Rod W7OM
Date: Fri, 14 Dec 2007 12:37:48 EST
From: W7OM@aol.com
Subject: [WriteLog] W5XD Keyer and no cw
To: writelog@contesting.com
Message-ID: <cec.236e18b6.3494196c@aol.com>
Content-Type: text/plain; charset="US-ASCII"
After a computer crash. Reloading problems were slowly corrected. Thought
WL was working fine. Rtty works fine and logging functions too. When I
tried cw the computer activates the PTT line long enough for the cw
message, but
NO cw generation. Using W5XD keyer to FT-1000MP. All played flawlessly
until computer crash and reload.
Thanks to all for the help on two minor glitches in setting up 10.64. Now
if I can get the cw going it will be back to normal.
Please reply direct as I have WL set to digest: _w7om@aol.com_
(mailto:w7om@aol.com)
73
Rod W7OM
**************************************See AOL's top rated recipes
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|