----- Original Message -----
From: "Larry Schimelpfenig" <k7sv@adelphia.net>
To: <writelog@contesting.com>
Sent: Thursday, May 12, 2005 12:01 AM
Subject: [WriteLog] PTT THROUGH RADIO CONTROL (LITERALLY)
> My ICOM 746 and 756PROII radios will do PTT through radio control.
> When I
> say that I don't mean it uses DTR or RTS on the same port as radio
> control.
> I mean within the radio control command table there is a data block
> that is
> described as "Exchanges transmit and receive (0=Rx, 1=Rx). This
> means that
> simply by virtue of having radio control, you can key and unkey the
> radio
> through Writelog and MMTTY. It's very handy with rtty and for the
> voice
> keyer.
>
> Do any of you know if any of the other radio manufacturers provide
> this
> feature as well?
The TS-850 does it, so probably all of the Kenwoods do.
Dave Hachadorian, K6LL
Yuma, AZ
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|