TRLog
[Top] [All Lists]

Re: [Trlog] DVK with radio's voice keyer

To: James Pahoundis <kc6ucn@yahoo.com>
Subject: Re: [Trlog] DVK with radio's voice keyer
From: Tree <tree@kkn.net>
Date: Sat, 16 Dec 2023 09:14:19 -0800
List-post: <mailto:trlog@contesting.com>
I have changed how the program looks for the Control-D to end a command.

It will use the last Control-D in the string now instead of the first
one.  This should allow you to program memory 4.

It will however prevent multiple commands from being in the same message -
but probably nobody is doing that.

It will be in the next release.

Tree

On Wed, Dec 13, 2023 at 7:25 PM James Pahoundis <kc6ucn@yahoo.com> wrote:

> Tree,
> That did the trick. It works now! Thank You.
> it worked for memory 1 to 3 not for 4? and now if I press the enter key on
> the call input line it plays the  "f1" memory.
>
> James
>
> On Wednesday, December 13, 2023 at 09:00:42 PM CST, Tree <tree@kkn.net>
> wrote:
>
>
> In order to send binary data to the radio - you will have to use a special
> format for the memory command.
>
> FE FE 94 E0 28 00 01 FD
>
> Would be this:
>
> CQ SSB MEMORY F1 = <03>SRS=<FE><FE><94><E0><28><00><01><FD><04>
>
> The <03> is a control-C which indicates this is a command as opposed to
> text of a CW message.  The <04> is a control-D which terminates the command.
>
> SRS= means that what comes after the equals sign will be sent to the
> active radio.  You can use SRSI if you want it to go to the inactive radio.
> SRS1 for radio 1 and SRS2 for radio 2.
>
> Tree
>
>
>
> On Wed, Dec 13, 2023 at 1:42 PM James Pahoundis via Trlog <
> trlog@contesting.com> wrote:
>
>  IC-7300.
>
>     On Wednesday, December 13, 2023 at 03:38:20 PM CST, George Fremin III <
> geoiii@kkn.net> wrote:
>
>  What sort of radio?
>
> George Fremin III
>
> > On Dec 13, 2023, at 2:56 PM, James Pahoundis via Trlog <
> trlog@contesting.com> wrote:
> >
> > Hello,    I seen in the linux manual it says we can use the radio's
> internal voice keyer. So I was trying to get itto work. setting up the cmd
> string for the radio is FE FE 94 E0 28 00 01 FD would be for slot 1.That
> did not seem to work. What am I missing? would love to get this working!
> > Thanks for the help73 James.
> > _______________________________________________
> > Trlog mailing list
> > Trlog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/trlog
>
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
<Prev in Thread] Current Thread [Next in Thread>