TRLog
[Top] [All Lists]

Re: [Trlog] TRlog / DOS 7.1 / 500Mhz processor / 1 gig memory problem

To: trlog@contesting.com
Subject: Re: [Trlog] TRlog / DOS 7.1 / 500Mhz processor / 1 gig memory problem
From: kd4d@comcast.net
Date: Tue, 28 May 2013 19:22:25 +0000 (UTC)
List-post: <trlog@contesting.com">mailto:trlog@contesting.com>
Hi Paul:

I would remove some of the stuff from the config.sys file.  When I get home, 
I'll try to send you a shorter example.  Also, I've found that on many new 
computers, emm386 will map memory that causes various problems.  The solution 
for me has been "jemm386" from the FreeDOS project.

I actually usually use the JemmEx program that replaces both himem.sys and 
emm386.

See http://www.japheth.de/Jemm.html.

I have also had problems with DOS versions before Windows98SE ("7.1") failing 
on large disk drives - particularly if the MS DOS partition is at the end of 
the drive.  However, it looks like you have done that.

Let me know if jemmex works.

73,

Mark, KD4D



----- Original Message -----
From: "Paul Erickson" <va7nt@telus.net>
To: trlog@contesting.com
Sent: Tuesday, May 28, 2013 1:42:36 PM
Subject: [Trlog] TRlog / DOS 7.1 / 500Mhz processor / 1 gig memory problem

I am in the process of building a new computer for the shack from some 
unused pieces I had. The board is a P2B-F with 500MHz processor and
1 gig of memory. I installed DOS 7.1 on one partition, but when
I try to execute the "install.exe" program I get the Runtime error 200
and when I try to execute TR itself, the computer hangs.

I do not have access to my current shack computer due to the distance
between my residence and shack but I believe it is also running a
500MHz processor, but the OS is Windows 98 run in command mode, and
the memory is about 500Meg.

Has anyone else tried to run TR under DOS 7.1 in a machine with
1 gig memory? Have you encountered the same issues, and if so
how were you able to resolve them?

The following is the contents of the DOS 7.1 config.sys file. My
DOS skills are a bit rusty, but I don't recognize anything there
that could be the problem. Is there something I am missing?

config.sys file contents:

DEVICE=C:\DOS71\ECHO.SYS W/e/l/c/o/m/e /t/o MS-DOS 7.10...
DEVICE=C:\DOS71\ECHO.SYS C/o/p/y/r/i/g/h/t M/i/c/r/o/s/o/f/t C/o/r/p. 
A/l/l /r/i/g/h/t/s /r/e/s/e/r/v/e/d.
DEVICE=C:\DOS71\HIMEM.SYS
DEVICE=C:\DOS71\EMM386.EXE RAM
DEVICEHIGH=C:\DOS71\SETVER.EXE
REM DEVICEHIGH=C:\DOS71\POWER.EXE
DEVICEHIGH=C:\DOS71\VIDE-CDD.SYS /D:IDE-CD
REM DEVICEHIGH=C:\DOS71\DISPLAY.SYS CON=(,,1)
COUNTRY=001,437,C:\DOS71\COUNTRY.SYS
SHELL=COMMAND.COM /P /E:640
DOS=HIGH,UMB,AUTO
FCBS=4,0
FILES=30
BUFFERS=20,0
LASTDRIVE=26
STACKS=9,256
SET PATH=C:\DOS71;..;

I realize that the path command is not what it needs to be for a
functioning TRlog system, but the TRlog hangup occurred while
I was executing the file from within it's resident directory.

Thanks in advance.

cheers, Paul - VA7NT
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>