TRLog
[Top] [All Lists]

Re: [Trlog] Working Screen Display

To: Gene Fuller <w2lu@rochester.rr.com>
Subject: Re: [Trlog] Working Screen Display
From: Tree <tree@kkn.net>
Date: Fri, 2 Mar 2012 07:19:17 -0800
List-post: <trlog@contesting.com">mailto:trlog@contesting.com>
As long as the BAND and MODE displays are not being affected - it shouldn't
create an issue for logging.

This behavior might be different with newer/older versions of the program
as there has been quite a bit of changes between KK1L and I around radio
control.  You might try the latest version if you aren't using it (6.96).

Tree

On Thu, Mar 1, 2012 at 10:25 PM, Gene Fuller <w2lu@rochester.rr.com> wrote:

> I am a relatively novice at both using a pc and using TR LOG. I am using a
> pc with XP. I have extracted  DOS which I use from a desktop icon -
> "Command Prompt". I have TR set up  for this weekend's ARRL SSB DX contest.
> I get to the "LOG" directory,enter TR and get to the "Working Screen.
> Everything seems fine up to there. I can enter contacts and use all of the
> "ALT" commands, etc.  I also have the computer connected to my ICOM radio
> and the UP/DOWN band commands work fine whether initiated from the computer
> or the radio.        Now the problem -
>
> The frequency displays on the Working Screen but after five or ten seconds
> it cuts out then comes right back on and continues to flash on and off,
> spending more time on than off.
>
> I could put up with this if necessary but I am affraid that it may effect
> the proper logging of the band information.
>
> This of sourse would have to show up the night before the contest starts.
> Any suggestions ASAP would be greatly appreciated.
>
> Gene / W2LU
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>