TRLog
[Top] [All Lists]

RE: [TRLog] /MM stations?

To: "Mike Heideman" <mike_heideman@hotmail.com>,<trlog@contesting.com>
Subject: RE: [TRLog] /MM stations?
From: "Bob Wolbert, K6XX" <k6xx@ihwy.com>
Date: Tue, 16 Dec 2003 07:06:29 -0800
List-post: <mailto:trlog@contesting.com>
Mike,

You'll find that Rhode Island is listed as "R" in the .DOM file. Thus,
anything starting with R will be credited as RI.

THIS particular issue is easily changed by editing the ASCII file so that RI
is RI or RH (why RH? That's what is used in the DOM file for other
contests...).

By making this change, the program SHOULD accept R1 and R2, etc., as
separate DX mults.

No, I haven't tried it. I wasn't lucky enough to have this problem last
weekend.

73 de Bob, K6XX
www.k6xx.com

> -----Original Message-----
> From: trlog-bounces@contesting.com
> [mailto:trlog-bounces@contesting.com]On Behalf Of Mike Heideman
> Sent: Tuesday, December 16, 2003 1:28 AM
> To: trlog@contesting.com
> Subject: Re: [TRLog] /MM stations?
>
>
> >>I worked N2NL/MM, but the program (6.79) wouldn't accept either "R2" or
> >>"MM2" as the exchange.  I just entered "2" and edited the Cabrillo file
> >>manually before submitting to ARRL.
> >
> >Great solution Doug.  For reasons I almost don't remember any more, this
> >special case is a really difficuly problem for TR.  I know I have tried
> >to find an easy way to work around it several times, and have ended up
> >being defeated.
> >
> >Tree
>
> In a panic I changed the callsign to N2NL/MM2 which caused TR to
> accept R2,
> but log it as RI.  I hadn't worked a Rhode Island so this also
> ended up as
> my first RI station.  After correcting both the callsign and R2 after the
> contest I ran POST, ignoring the complaint about R2 during the multiplier
> check.  What I didn't realize until later is that we were never credited
> with RI.  So I found the first CW contact with RI, edited in the
> new mult,
> and reran the multiplier check in POST.  It complained that RI
> had already
> been worked.  Apparently R2 is interpreted as RI.
>
> So if you worked your first RI after working N2NL/MM then you may not be
> credited for the RI multiplier in your claimed score.  If you see
> this come
> up in your multiplier check after editing in R2 then don't correct the
> duplicate RI mult.
>
> -Mike, N7MH
>
> _________________________________________________________________
> Winterize your home with tips from MSN House & Home.
> http://special.msn.com/home/warmhome.armx
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>

_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>