TRLog
[Top] [All Lists]

[Trlog] Serial Connections with Windows ME

Subject: [Trlog] Serial Connections with Windows ME
From: k9mi at arrl.net (Mike Brown)
Date: Sat May 24 18:29:22 2003
Jim, I would format the hard drive and use Win 98 or 95.
And I would "Reboot to Dos" to run TR. Just my opinion
though.




----- Original Message ----- 
From: <vilbe8@aol.com>
To: <trlog@contesting.com>
Sent: Saturday, May 24, 2003 8:18 PM
Subject: [Trlog] Serial Connections with Windows ME


> I have been using TR for years and have always been very pleased with
the
> performance.  This past week, the family received a new computer.  As
a result, I
> have received for my shack at 1GHZ Pentium III to replace the Very Old
> Pentium I that I had in the shack.
>
> Never had a problem with the interface between the radio and computer
before.
>  The old system was running Windows 95.  New system runs Windows ME.
>
> Anyway, I can get the computer to key the rig with no problem.  Cannot
get
> the rig (TS-2000) and the computer to talk on the serial port.  I have
made sure
> that the rig and the computer ports are set up properly.  I have
changed the
> BIOS on the computer to reflect the correct address.  Have tried with
my
> TenTec Omni VI as well and no go.
>
> Checked the cable by connecting the TS-2000 to an old laptop and it
worked
> great.  I know there is some simple solution, but not being a computer
wizard, I
> am at a loss.
>
> Anyone have any suggestions?  Would be truly appreciated.
>
> Thanks for reading!
>
> Jim
> K3WU
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.483 / Virus Database: 279 - Release Date: 5/19/2003

<Prev in Thread] Current Thread [Next in Thread>