Towertalk
[Top] [All Lists]

Re: [TowerTalk] Looking for typical size attic info

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Looking for typical size attic info
From: JP <jp@ezoom.net>
Date: Mon, 13 Feb 2023 07:04:46 -0800
List-post: <mailto:towertalk@contesting.com>
Yep, my house has radiant barrier in the attic. It is pretty much a faraday 
cage. Couple that with the stucco exterior, which is backed by chicken wire if 
you didn’t know, and the house is a very effective rf shield. 

Definitely not a place I’d try to put an antenna. 

J.P. W2XX/7

> On Feb 13, 2023, at 6:33 AM, Mpridesti via TowerTalk 
> <towertalk@contesting.com> wrote:
> 
> Good point. Kinda tough working the world from a RF tight enclosure:)
> 
> Regards,
> 
> Mark, K1RX
> 
> 
>> On Feb 13, 2023, at 9:30 AM, Chuck Dietz <w5prchuck@gmail.com> wrote:
>> 
>> I understand many (all?) of the newer houses have insulation with aluminum
>> foil backing inside the roof. My friends who have HOA restrictions, put
>> antennas on their wood fences. Nowadays with modes like FT8, their stations
>> can be surprisingly effective.
>> 
>> Chuck W5PR
>> 
>>> On Mon, Feb 13, 2023 at 8:19 AM Mpridesti via TowerTalk <
>>> towertalk@contesting.com> wrote:
>>> 
>>> Thanks Henry. Good suggestions!
>>> 
>>> Certainly one challenge would be just building the antenna in close
>>> quarters:)
>>> 
>>> Regards,
>>> 
>>> Mark, K1RX
>>> 
>>> 
>>>> On Feb 13, 2023, at 9:16 AM, Henry Pollock - K4TMC <kilo4tmc@gmail.com>
>>> wrote:
>>>> 
>>>> Mark,
>>>> 
>>>> You might consider a 2-element Hexbeam.  A 20-10 Hexbeam has a turning
>>>> radius around 10 to 12 ft which could fit in some attics.  To make it fit
>>>> higher in tight attics, consider mounting it upside down, making it look
>>>> like a normal umbrella.
>>>> 
>>>> 73,
>>>> Henry - K4TMC
>>>> 
>>>> 
>>>>> On Mon, Feb 13, 2023 at 8:42 AM Mpridesti via TowerTalk <
>>>>> towertalk@contesting.com> wrote:
>>>>> 
>>>>> Looking at the HOA/condo situation as I get older and wonder what are
>>> the
>>>>> typical size attics for putting, ideally, a small rotating Yagi for
>>> 20-10
>>>>> m. Key question is what the biggest turning radius one might get?
>>>>> 
>>>>> 
>>>>> Regards,
>>>>> 
>>>>> Mark, K1RX
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> 
>>>>> 
>>>>> 
>>>>> _______________________________________________
>>>>> TowerTalk mailing list
>>>>> TowerTalk@contesting.com
>>>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>>> 
>>>> _______________________________________________
>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> TowerTalk mailing list
>>>> TowerTalk@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>> 
>>> _______________________________________________
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>> 
>> _______________________________________________
>> 
>> 
>> 
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>