Google weather flow tempest.
Wireless. Solar powered. No moving parts.
Jim ab3cv
On Tue, Jan 31, 2023 at 3:04 PM Richard Karlquist <richard@karlquist.com>
wrote:
> The only sensor you need up on the tower is an anemometer. since wind
> speed varies with HAAT. Get a wired (not wireless) one to avoid having
> batteries at the unit. Leave the WX station on the ground for the other
> readings, including ground wind speed. You would want that in addition
> to wind speed at the top of the tower.
>
> Hazers are very fussy things that you should avoid if at all possible.
>
> --
>
> Rick Karlquist
> N6RK
>
> On 2023-01-31 08:21, Rick Harrington N0VT wrote:
>
> > I would like to have the sensing unit of my home weather station near
> the top of my tower (80'). But instead of a fixed installation, I'd like
> to be able to raise/lower it via rope & pulley for battery changes,
> cleaning etc. There would have to be a way at the top of the tower to dock
> it into the same north/south orientation each time. (I'm thinking of some
> sort of small hazer-like contraption.)
> >
> > Has anyone ever done this, or seen info on doing it?
> >
> > 73,
> >
> > Rick N0VT
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|