Towertalk
[Top] [All Lists]

Re: [TowerTalk] New 9 circle PCB with CMCs

To: "N2TK, Tony" <tony.kaz@verizon.net>
Subject: Re: [TowerTalk] New 9 circle PCB with CMCs
From: Stan Stockton <wa5rtg@gmail.com>
Reply-to: wa5rtg@gmail.com
Date: Wed, 2 Feb 2022 17:58:37 -0500
List-post: <mailto:towertalk@contesting.com>
I just ordered ten boards.  I will not be back to USA until March 24.  They
should be there when I arrive.  I will probably use 4 or 5 of them and if
anyone wants one and is not in a hurry, they will be cheap - like about
$5.00 each plus shipping in the USA.

73...Stan, ZF9CW

On Tue, Feb 1, 2022 at 9:52 PM tony.kaz--- via TowerTalk <
towertalk@contesting.com> wrote:

> Steve,Thanks for the video and all the work you put into this. The video
> did a good job and explanation.
> If someone would be ordering boards would you be so kind to order one for
> me? Maybe PI4CC will be doing that? Getting boards made is an area I am
> very weak. I am sure there are others who would like to get boards.I will
> be needing a board to make up another 3-el vertical. The original works
> fine E/W. I will be putting up a 3-el N/S. I don't have the room to make a
> circle of verticals. I have the present system along a property line. Will
> do the same for the next 3-el.73,N2TK, Tony
>
>
> -----Original Message-----
> From: VE6WZ_Steve <ve6wz@shaw.ca>
> To: tower and HF Antenna Construction Topics. <towertalk@contesting.com>
> Sent: Tue, Feb 1, 2022 11:19 am
> Subject: [TowerTalk] New 9 circle PCB with CMCs
>
> Today I uploaded a YouTube video describing my new 9 circle combiner board
> PCB design that has small Murata SMD CMCs on each RG-6 feedline.
>
> I include PCB file links to download in both KiCad format or a zipped
> Gerber folder if you want to build your own.  A BOM and an image of the
> schematic is included as well.
> This is the 9-circle array that was designed by John W1FV.
>
> I review why we need these CMCs, I talk about these small Murata chokes
> and some VNA tests I did and how these same units can be used as Magic-T’s.
> The new design also has a pin-out for the vcc and relay control lines, has
> the option for gas discharge tubes on the vcc and control lines, and the
> board has a slightly larger footprint than my previous designs so its its
> easier to access the F-connecters for field installation.
>
> The evaluation is still on-going at VE6WZ, but the board tested very well
> in the shop with the VNA, and I used it this weekend for the CQWW 160m test
> and it performed well.
>
> I know there are many that don’t like to watch a video, and I may build a
> PDF document, but in my prior life, all I did was make technical/
> scientific documents and I’d rather not do that anymore.
> It’s much easier to say things quickly in a video.  If a picture is worth
> a 1,000 words, then a video is worth a million.
>
> https://youtu.be/lVW1CmrzP7c <https://youtu.be/lVW1CmrzP7c>
>
> 73, de steve ve6wz
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>