Towertalk
[Top] [All Lists]

Re: [TowerTalk] Fwd: Butternut mystery

To: Grant Hopper <kb7wsd@gmail.com>
Subject: Re: [TowerTalk] Fwd: Butternut mystery
From: Floyd Rodgers <kc5qbc@swbell.net>
Date: Sun, 26 Sep 2021 21:44:16 -0500
List-post: <mailto:towertalk@contesting.com>
That appears to be what it is possibly missing a part or two. Now to find the 
manual.
Thanks!

Floyd KC5QBC

> On Sep 26, 2021, at 7:42 PM, Grant Hopper <kb7wsd@gmail.com> wrote:
> 
> Oops.  Forgot to include the group.
> 
> ---------- Forwarded message ---------
> From: Grant Hopper <kb7wsd@gmail.com>
> Date: Sun, Sep 26, 2021 at 5:41 PM
> Subject: Re: [TowerTalk] Butternut mystery
> To: Floyd Rodgers <kc5qbc@swbell.net>
> 
> 
> Sounds like the elevated counterpoise kit for a HF9V, etc.
> 
> Should have also had two saddle clamps (U bolt setups with plate.)
> 
> Check out DX engineering's BUT-CPK
> https://www.dxengineering.com/parts/but-cpk and see if what you found looks
> like that.
> 
> 73,
> Grant
> KB7WSD
> 
>> On Sat, Sep 25, 2021 at 7:59 PM Floyd Rodgers <kc5qbc@swbell.net> wrote:
>> 
>> Found a butternut box with ten aluminum pieces that telescope into each
>> other making two poles about 7’ each. Also contains bag with 4 long wires,
>> a short fiberglass and aluminum rod and a strap with pl259 with short wire
>> with a lug. Any ideas on what this is?
>> 
>> Floyd KC5QBC
>> _______________________________________________
>> 
>> 
>> 
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>