Towertalk
[Top] [All Lists]

Re: [TowerTalk] Phillystran Tension Gage

To: "'John Keating'" <john.keating@sbcglobal.net>, <towertalk@contesting.com>, <kb8nnu@yahoo.com>
Subject: Re: [TowerTalk] Phillystran Tension Gage
From: "Tim Duffy" <k3lr@k3lr.com>
Date: Tue, 13 Jul 2021 00:09:40 -0400
List-post: <mailto:towertalk@contesting.com>
The required steel leaders at the ground ends are in series with your
Phillystan - no worries - so no problem for the Loos Gage.

https://www.dxengineering.com/parts/loo-pt-2

73,
Tim K3LR @ DX Engineering.com

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of John
Keating
Sent: Monday, July 12, 2021 11:53 PM
To: towertalk@contesting.com; kb8nnu@yahoo.com
Subject: Re: [TowerTalk] Phillystran Tension Gage

Hi Dave,

After searching far and wide to come to the conclusion there is none
commercially available, I built my own tension gauge based on a suggestion
from K6OK who did the engineering on my tower. It involved a 6' 2x4 with
pulleys at each end and required calibrating the deflection under load of
the phillystran in the center of the span between the pulleys using a pull
gauge (I used a cheap fishing scale). You can sanity check the results with
a bit of trigonometry.

 

John

 

On 7/12/2021 7:22 AM, Dave Eagle wrote:

>Hello,

>I recently put up a 40' Glen Martin tower with phillystran guys (.22").?? I
was looking for a way? to measure the tension on the Phillystran >to balance
the install out.? I was originally thinking I could utilize the Loos PT-1 or
PT-2 but the ranges don't match the manufacturers >specs.? The GM docs that
I have call for 100-175 lbs.

>Is there anything available to measure the force in that range that will
take a .22" phillystran?

>Thanks,

>DaveKB8NNU

 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>