Towertalk
[Top] [All Lists]

Re: [TowerTalk] Feedthroughs for rotator cable?

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Feedthroughs for rotator cable?
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Fri, 13 Nov 2020 15:24:31 -0800
List-post: <mailto:towertalk@contesting.com>
On 11/13/2020 2:29 PM, jimlux wrote:
These days, I'd use those nifty green connection blocks with the screw clamps. Stick the stripped wire in, tighten the screw, done. No need for ring or spade lugs, and you can easily probe from the top.

Yes, we've used them in the world of installed audio systems since at least the '90s, where they're known as Phoenix connectors. SteppIR adopted them sometime in the last decade. If I'd had them in my junk box at the time, I would have certainly used them. :)

73, Jim K9YC
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>