> The 3M Scotchkote website says:
> Suitable for use for direct burial and moisture protection
> 3M? Scotchkote? Electrical Coating FD is designed to use with Scotch? Vinyl
>Electrical Tapes. It is ideal for use in applications that are subjected to
>excessive amounts of moisture and oil. RoHS Compliant.
> Nothing said about UV-resistance.
That's because there ain't none. It's for DIRECT BURIAL.
The pros I used to run into on cell sites used clear acrylic spray paint as
the final coat. I do like the use of Rescue Tape. It's the same stuff that
SteppIR uses for their fiberglass element joints and is reasonably bombproof.
After years of using regular Scotch 33 and 88, my favorite tape is now the
2" wide Scotch 88 10356 rolls. It's the Bell System standard and will cover
lots of problems reliably. You don't need any additional coatings for it and
it'll last for years. Just be sure to let the tape RELAX after cutting it and
before laying it down as the last layer. Any tension will create flagging as
the loose end flies around in the wind.
Cheers,Steve K7LXCTOWER TECH -Professional tower services for amateur and
commercialCell: 206-890-4188
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|