Towertalk
[Top] [All Lists]

Re: [TowerTalk] Dumb question on Mosley TA33

To: W1JCW <w1jcw@hotmail.com>
Subject: Re: [TowerTalk] Dumb question on Mosley TA33
From: Dan Hearn <n5ardxcc@gmail.com>
Date: Sat, 2 Nov 2013 19:10:50 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Tom: The use of a coil of coax as a choke is a poor solution to the problem
of feed line radiation. It is affected by the feed line length and distance
to ground. Not only that, it is not well suited to use over the 3 bands of
your antenna.  Modern technology using ferrite cores allows you to generate
thousands of ohms of impedance over a wide frequency range. Design of these
chokes is covered on K9YC's web site. They are simple and inexpensive to
build or you can buy them from Balun Designs or Array Solutions for way
under a hundred bucks complete in weather tite cases. . The cores are made
by Fair Rite and can be bought from Mouser or other parts houses.

73, Dan, N5AR


On Sat, Nov 2, 2013 at 5:43 PM, W1JCW <w1jcw@hotmail.com> wrote:

> No.
>
> Go with a 5 turn 6" diameter RF coke at the feed point per Mosley
> instructions.
>
> I've had several Mosley antennas over the years and have never had an
> issue with RF.
>
>
> 73-
> W1JCW
> John
>
> --------------------------------------------------
> From: "Tom Nicholson" <Gunsrus1942@Comcast.net>
> Sent: Saturday, November 02, 2013 3:45 PM
> To: <TowerTalk@contesting.com>
> Subject: [TowerTalk] Dumb question on Mosley TA33
>
>  Is there anything to be gained from feeding the TA33 with a 1:1
>> balun??????
>>
>> Tom, W1ALZ
>>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>



-- 
Dan Hearn
N5AR
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>