Towertalk
[Top] [All Lists]

[TowerTalk] Nicopress sleeves

To: <towertalk@contesting.com>
Subject: [TowerTalk] Nicopress sleeves
From: warpdrive7@charter.net (K3GM)
Date: Tue, 7 Aug 2001 19:15:55 -0400

Assuming that 3/16 EHS is somewhere in the neighborhood of .187", my
Machinery's Handbook says that would be the equivalent to 5 AWG.  I was
probably one of the contributors to that Nicopress thread as all of the
fittings on my tower are of that type.  Mine were done by myself at a US
marine supply store, and I definitely remember purchasing the sleeves by the
fraction of an inch rather than wire gage.

Tom Hybiske K3GM

>   Looking back in the archives, I saw several
> references to using Nicopress sleeves instead of wire
> clamps for EHS guy wire. Most of the Nicopress adds
> and packages I've seen refer to wire size( 12, 14,
> etc). Anyone know what the equiv. wire size is for
> 3/16 EHS?
>



List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>