Towertalk
[Top] [All Lists]

[TowerTalk] Open Wire Line

To: <towertalk@contesting.com>
Subject: [TowerTalk] Open Wire Line
From: n7cl@mmsi.com (Eric Gustafson)
Date: Sat, 24 Oct 1998 13:42:48 -0700


Mike,

We frequently use this crude but relatively effective method to
identify dielectric material that is potentially suitable for RF
work.  But we never use any water along with the sample.

Why are you including a cup of water?  And what is the "it" that
shouldn't warm up?  The cup of water or the plastic?  The water
will almost certainly get warm regardless of how good the plastic
is.

Is the water to use to determine the length of time?  For
example; "Water is warm so the time was long enough to heat the
plastic if it was going to heat"?

Just curious.

73, Eric  N7CL



To: <towertalk@contesting.com>
>Date: Fri, 23 Oct 1998 13:41:14 -0600
>From: Mike Lamb <n7ml@imt.net>
>
>Jim,
>
>It might be a good idea, just to be safe, to throw the material
>into a microwave oven with a cup of water for a minute and see if
>it warms up or not.  If it does, it may not be very good for RF.
>
>73/Mike

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>