Towertalk
[Top] [All Lists]

[TowerTalk] pliable rollers

To: <towertalk@contesting.com>
Subject: [TowerTalk] pliable rollers
From: k1jn@99main.com (Joe Natale K1JN)
Date: Tue, 15 Sep 1998 07:45:28 -0400
Dave,

Heights is still in business, I just got some parts made up for an older
freestanding aluminum tower of theirs. Drake Dimittri is the owner and the
guy you want to talk to. They are now located in Pensacola, FL. Their phone
number is 850-455-1210.

-----Original Message-----
From: David J. Windisch <dwindk3bhj@fuse.net>
To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Tuesday, September 15, 1998 7:05 AM
Subject: [TowerTalk] pliable rollers


>
>Need some ideas for replacing the 30+-year-old rollers on my Heights
>crankup-foldover "old men's tower" (they keep the telescoping center
section
>from rubbing against the outer section).  SO, they gotta be sturdy and
>pliable.
>OD is about 1-5/16", ID is about 5/8", width is about 1-1/8".
>Any ideas on sources for materials?  I can get the (if needed) machining
>done here in Cincinnati.
>TIA -- 73, Dave, K3BHJ.
>
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>