Towertalk
[Top] [All Lists]

[TowerTalk] rohn hbx56 & 31 foot long 432 antenna

To: <towertalk@contesting.com>
Subject: [TowerTalk] rohn hbx56 & 31 foot long 432 antenna
From: n4kg@juno.com (T A RUSSELL)
Date: Mon, 29 Jun 1998 18:00:54 -0600
This is an old message but it points out the foolishness of
using only boomlength as a measure of antenna torque.
For the 432 MHz beam in question, it could also considered
equivalent to a 20M rotatable dipole with ZERO boom length 
and a 2 sq ft. wind load.  Would that be too much for HBX 56? 

de  Tom  N4KG
............................

On Sun, 22 Mar 1998 12:35:39 EST K7LXC <K7LXC@aol.com> writes:
>In a message dated 98-03-22 01:45:07 EST, kb0pyo@rconnect.com writes:
>
>>   I am going to be ading to my tower collection & would
>>  like some input on putting a 31 foot long 432mhz beam on a
>>  rohn hbx56. I know rohn says no boomlengths longer than 10'
>>  but this antenna only has 2 sq. feet of wind load (the
>>  antenna is very offset as far as load though, with the
>>  feedline weight in back you end up with 17 feet of boom in
>>  front & 14 feet in back with the extra windload of 14 feet
>>  of 1/2 inch heliax). I routinely see 60 mph winds here & 80
>>  + happens every couple of years, will the hbx stand up to
>>  the twist this antenna might put on it?
>
>      First of all, Yellow Medicine County is an 85 MPH windspeed 
>zone.
>
>      The HBX56 is rated at 10 sq.ft. at 70 MPH. Since you'll be using 
>the
>BX-2 section as the top section, it's better than the smaller BX-1 but 
>not as
>sturdy as the larger BX-3. 
>
>     A boom this long will generate an appreciable of torque on the 
>rotator,
>rotator shelf and then the tower itself. Over time, the rotator shelf 
>will
>crack and break. IMO it's too much antenna for the BX-2 section. 
>Better to
>lose 8 feet and use the BX-3 as your top section for torque handling. 
>You'll
>still sacrifice the rotator shelf over time but it's an improvement 
>over your
>original configuration. 
>
>    You might want to consider a Trylon Titan self-supporting tower or 
>25G
>guyed tower if you really want it to be reliable.
>
>73,  Steve  K7LXC
>
>     TOWER TECH -- professional tower supplies and services for 
>amateurs
>                                    and US Trylon distributor and Rohn 
>dealer
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>Search:                   http://www.contesting.com/km9p/search
>

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] rohn hbx56 & 31 foot long 432 antenna, T A RUSSELL <=