Towertalk
[Top] [All Lists]

[TowerTalk] 80 Meter Sloper (Long)

To: <towertalk@contesting.com>
Subject: [TowerTalk] 80 Meter Sloper (Long)
From: k6ll@juno.com (k6ll@juno.com)
Date: Sun, 8 Feb 1998 18:09:39 +0000
On Sun, 08 Feb 1998 09:10:04 -0600 Bob Perring <perring@texas.net>
writes:

>The "shield connected wire" is the problem.
>
>It must come down rather sharply (if it is to run off SW and opposite 
>to
>the "hot wire"), go off at a wield angle with respect to the "hot 
>wire"
>(out to a corner guy point in the WSW corner of the yard), or it can 
>even
>be bonded to the tower, run down the tower, inside the tower, etc., so 
>as
>to make sure I have a resonate counterpoise sort of affair.

This is a new one on me. I just connect the shield to the tower, and
that's it.

I modeled my half sloper for 80, and some of the
highest currents are in the tower itself. The sloper really looks more
like a method of feeding the tower than a matter of the sloping wire
doing all the radiating, at least in my installation.

The modeled pattern has virtually no variation with azimuth angle.

Dave Hachadorian, K6LL
Yuma, AZ
K6LL@juno.com


_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>