>Just cut 20 more 70' radials. Time to go play in the yard.
If that were all I could add, I'd switch them to 40 35' radials.
The R component of my inverted L on around 1840 is 11 ohms. X is
around 20. That's with 101 radials. I look for a R of at least 15
ohms where X is minimal on an analyzer sweep. At that point the
ground system is getting good. The vertical part of the L should be
at least 50 feet. Just ground the analyzer and put the vertical
element right into it.
73
Rob
K5UJ
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|