TenTec
[Top] [All Lists]

Re: [TenTec] Omni-D with an Annoying 1khz Tone (MadScientist)

To: tentec@contesting.com
Subject: Re: [TenTec] Omni-D with an Annoying 1khz Tone (MadScientist)
From: <forum4ll@verizon.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 11 Jan 2019 17:33:56 +0000 (UTC)
List-post: <mailto:tentec@contesting.com>
Pete,

It is possible that this maybe a "feature" but the owner and I feel that
it shouldn't be there. It gets a little confusing tuning into CW or SSB
with that tone in the background. It does disappear with a strong signal.

Lyman KK6LPW


>Date: Wed, 9 Jan 2019 14:25:45 -0500
>From: Peter Bertini <radioconnection@gmail.com>
>To: tentec@contesting.com
>Subject: Re: [TenTec] Omni-D with an Annoying 1khz Tone (MadScientist)


>I am curious if the radio always had the tone in the background?

>If it is something that has recently increased, I'd check the PC board
>mounting screws, and also be suspicious of any electrolytic caps on the
>13.8 volt rail that may be developing a high ESR.

>I had an Omni VI that had "zipper noise" whenever the main tuning was
>moved. Ended needing to add an  electrolytic cap across the Vcc and Gref
>pins on the AD DSP chip.

>Pete


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>