Hello
I would take a close look at the molex connector and fuse then
I would try PA1AP LCD display mod before replacing it.
It's in the file section of the Orion565/566 Yahoo group.
Fernando N2FQ/6
n2fq@sbcglobal.net
On Oct 21, 2012, at 8:29 AM, "denton" <denton@oregontrail.net> wrote:
> Hi all..
> I have a TT Orion that has developed what looks like a purple blob in the
> lower left hand corner of the display...also on boot up of the rig in the am
> on a cool morning the display will be kinda faint for a bit. Seems to be
> related to room temperature. I like to have the house rather cool at night at
> about 64f.
> Power supply voltage from my Astron 35 is tweeked to just below 13.9 vdc at
> power supply output and have replaced one bulging cap on the power
> distributing board with the recommended one from Moser.
> Time to replace the Orions display? If so, how big a job and what do they
> cost from TT.
> Thanks, de Denton WB7TDG
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|