You'll need a computer to run the FLEX 1500. See their page
http://www.flex-radio.com/Products.aspx?topic=F1.5k_features for details. It
could be an older computer.
73,
Gary - AB9M
--------------------------------------------------
From: "John Molenda" <cdistflatfoot@gmail.com>
Sent: Friday, October 01, 2010 2:12 PM
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Omni VII
> Hi Gary , thanks for your help . Will I a computer to run the 1500 ?
> or just the monitor to show the panadapter ?
>
> On 10/1/2010 3:02 PM, CSM(r) Gary Huber wrote:
>> John,
>>
>> I think the easiest way is to contact TenTec and ask for the cables for the
>> AUX Receiver modification for the 588. (No soldering or drilling required)
>> Then purchase a FLEX 1500 (or similar multiband SDR).
>>
>> Hook up the SDR (receive only) to the 588's AUX Antenna terminals (formerly
>> the two spare phono jacks on the rear of the 588) and control both with
>> DXLab Commander.
>>
>> The FLEX 1500 will provide a 48 kHz wide real time Panadapter.
>>
>> Doesn't get much easier; no soldering, no drilling, no programming although
>> a computer and screen are needed to display the Panadapter.
>>
>> 73,
>>
>> Gary - AB9M
>>
>>
>> --------------------------------------------------
>> From: "John Molenda"<brazos@rochester.rr.com>
>> Sent: Friday, October 01, 2010 12:48 PM
>> To: "TEN TEC DISCUSSION"<tentec@contesting.com>
>> Subject: [TenTec] Omni VII
>>
>>> Hi All , I would like to know if there is a easy way to hook up a pan
>>> adapter to the omni 7 radio . /are we waiting for Ten/ /Tec to create a
>>> pan adapter for this radio ?/ has anyone used the P3 Elecraft
>>> pan-adapter with this rado . I want to make my next radio one with a
>>> pan-adapter and very much like the omni VII . Thanks John Molenda kb2huk
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|