TenTec
[Top] [All Lists]

Re: [TenTec] The Eagle

To: tentec@contesting.com
Subject: Re: [TenTec] The Eagle
From: kc9cdt@aol.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 27 Sep 2010 07:46:12 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
James,
I'm worst than you...I want it all too!
I like the older tube stuff from the 50's and 60's AND I have an Orion 
II.
I actualy do work on and restore Drake & Collins gear as well.

I enjoy both types of gear for different reasons.

73,
Lee, KC9CDT



-----Original Message-----
From: Richards <jruing@ameritech.net>
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Sent: Mon, Sep 27, 2010 1:47 am
Subject: Re: [TenTec] The Eagle


  Rich -- I appreciate your position.   Nevertheless, I think I
represent a different market segment.

Seems like everyone would create the new radio in  1) their own image,
and   2)   make it as simple and traditional as possible, like their
old  XXX or YYY rigs.    I have no problem with that,  because we are
all consumers, and each of us has his own agenda.

But, even though I, too, am a relatively new ham,  I want brand new,
highly complex, and exciting gear with all the features,  for 
reasonable
money.   I DO  NOT want simple, old fashioned, or used gear - even at a
low price.  And even though I CAN certainly live without a panadapter 
or
live band scope,  I STILL WANT ONE.

Not all new hams want simple, cheap, used radios.    The Omni VII is my
first transceiver, and I love using it,  but I sometimes wonder whether
I should have opted for the Orion II, or some other rig, instead.   I 
do
not want a cheap "bargain" rig my friends say I should buy at the next
local swap meet or hamfest,   and then cry because it does not work
right.    Duh... why was the guy selling it...?   If it was such a 
great
rig, he would keep it, right?    Maybe (not always) he is selling it
because it is ... well... busted.   But I don't want old radios from 
the
1960s - I want exciting, new, and high tech gear.

I played SWL and I waited 35 years to enter ham radio when I had both
time and money to do it up right.   I did other stuff in the mean time,
and don't worry, I had a good time doing all of that.    But, I am 
tired
of everyone trying to dummy down, cheap sell, and simplify ham radio.   

I worked damn hard to be able to retire young and afford good gear.  I
don't have a pension (I worked alone and made it all on my own)  and 
now
I want the GOOD STUFF - new, high tech, high quality;  the latest and
greatest.  I want it all.    (How am I doing... got a pretty good rant
going, eh?)    ;-)

And...  Not all of us feel adapt or safe modifying a brand new radio - 
I
spent nearly 30 years in a career that did not involve radio
technology...  so I would prefer TenTec install the IF output jack and
then third parties or guys like Carl N4PY can take it from there.     I
am now building every receiver kit TenTek makes, and I am learning to
fix my radios, and do home brew projects - but there is no crime in
being new at it.

I think adding an If output jack could easily be just the sort of
feature that can set the rig apart from its competition.   You can bet
TT will lose sales if Kenwood has one on its new rig.    Look how much
grief the Omni VII guys get because the K-3 has one.     If the other
guys have it, and TT does not, it will cost TT sales -- not all sales,
but enough to significantly affect the bottom line.

So.... while some guys want simple,  traditional, and familiar gear ... 

I want new, complex, and high tech toys.

Different strokes for each of us.   After all, we are just blowing off
steam on what we each would like to see, right?  It's only talk, after
all.   ;-)

Happy trails -- I am glad to hear your side, and thanks for listening 
to
mine.

=====================  James - K8JHR  ==========================




On 9/26/2010 8:36 PM, Rick - NJ0IP / DJ0IP wrote:
> Maybe because it can't be built in this country for the price you are
> proposing...
> Not sure it can be built in any country for that price.
>
> When I became a ham, 48 years ago, I too began with used equipment.
> Couldn't afford a new rig.
>
> New hams don't need the performance of the Eagle to make contacts.
> The Eagle is a serious radio, and you just don't get one new for 700 
bucks.
>
> That's like saying, why can't someone build a good car for $5000?  Or 
$7000?
>
> Someone said it earlier...the FT-450 is a great radio for the price.
> I think it's about $800 new.
>
> 73
> Rick
>
>
> -----Original Message-----
> From:tentec-bounces@contesting.com  
[mailto:tentec-bounces@contesting.com]
> On Behalf Of Louis Ciotti
> Sent: Sunday, September 26, 2010 7:27 PM
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] The Eagle
>
> Just my $0.02 worth....
>
> The eagle looks nice... simple controls, simple display... etc..
>
> Personally what I would like to see out of TenTec is a good entry 
level
> HF+6M radio.
>
> I am what is considered a "new" ham.  only been licenced a hand full 
of
> years.  My first HF radio was my grandfathers old model 540 (Triton 
IV).
> And you know what... I love the simplicity of that radio.  No menus, 
just
> knobs on the front panel.  I have often wondered why can't any 
manufacture
> make a nice entry level rig with a similar number of controls all on 
the
> front panel.  Include 4 filters, normal&  narrow SSB and CW filters 
with
> fixed BW on each.  I am thinking a sort of "throwback" rig, but with a
> modern internal design.  Simple Analog SWR meter, Digital frequency 
display,
> sensitive receiver, Tentec QSK, 5-100W output power, a NB... what 
else would
> a new ham need, and priced around $500.
>
> I often hear how the "hobby is dieing" well hard to get people 
involved in a
> hobby where an new "entry level" radio is priced over $700.  Sure 
there is a
> market for more expensive radios with more bells and whistles, but 
there is
> a big hole for new hams still getting their feet wet.  Sure there are
> used/older radios, but why not have a decent new radio with all the 
benefits
> of newer modular designs, newer manufacturing styles, etc.... and 
priced at
> a level that won't leave the new Tech stuck on 2M because a new HF 
radio is
> out of his reach price wise.
>
> 73,
>
> Lou
> K2LRV
>
> On Sun, Sep 26, 2010 at 8:01 PM, Rick - NJ0IP / DJ0IP<Rick@dj0ip.de>  
wrote:
>
>> Paul, I couldn't disagree more, although you are right :-)
>>
>> For me, I don't give a hoot about a connection for a Pan adapter.
>> I need a radio, not a tv set.
>> I want to have a separate RX antenna input.
>> I want to have the ability to insert a preselector when I use the 
radio in
>> Europe.
>>
>> But you know what....I can install both of those myself.  I don't 
need
>> TenTec to do it for me.  I have a drill.
>>
>> My take, TenTec wanted to get the product to market as quickly as
> possible.
>> FULLY AGREE, they should make a few extra holes on the back panel.
>> But get the product on the market ASAP to stop the erosion away from 
the
>> brand.
>>
>> To my knowledge, this is the first Ten-Tec transceiver that does not 
have
> 2
>> extra "spare" RCA phono plugs on the back panel.  Too bad.
>>
>> 73
>> Rick
>>
>>
>> -----Original Message-----
>> From:tentec-bounces@contesting.com  
[mailto:tentec-bounces@contesting.com]
>> On Behalf Of Paul Christensen
>> Sent: Sunday, September 26, 2010 4:26 PM
>> To: Discussion of Ten-Tec Equipment
>> Subject: Re: [TenTec] The Eagle
>>   Importance: High
>>
>> Probably the most significant way to sway TS-590 purchasers over to 
the
>> Eagle is to include a 9 MHz I.F. port for use with LP-PAN, SDR-IQ, 
or QS1R
>> as a panadapter and second Rx.  For the minimal manufacturing 
effort, I
>> just
>>
>> cannot see how this one significant feature could be overlooked with 
the
>> full production unit.  At the very least, a panel hole for a BNC jack
>> should
>>
>> be provided for those that want to add their own I.F. buffer, like 
that
>> manufactured and sold by Jack Smith at Clifton Labs.
>>
>> Paul,  W9AC
>>
>> ----- Original Message -----
>> From: "Richards"<jruing@ameritech.net>
>> To: "Discussion of Ten-Tec Equipment"<tentec@contesting.com>
>> Sent: Sunday, September 26, 2010 4:57 PM
>> Subject: Re: [TenTec] The Eagle
>>
>>
>>> OK... I can follow that.    Thanks for the additional gloss.
>>>
>>>
>>> ======================  JHR  ============================
>>>
>>> On 9/26/2010 16:41, Rick - NJ0IP / DJ0IP wrote:
>>>> Richards, I made that statement about having degrade GC receivers 
if
>> they
>>>> are in a transceiver; but it is NOT true for the Omni VII.
>>>> The receiver is only degraded when you are trying to receive at or 
near
>>>> the
>>>> IF frequency (i.e., 9 MHz).
>>>> It is not degraded across the rest of the GC spectrum.  Sorry for 
the
>>>> confusion.
>>>>
>>> ===========================================================
>>> _______________________________________________
>>> TenTec mailing list
>>> TenTec@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/tentec
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>