Whoa!
watch out and be careful using 409 cleaner, or any other cleaner for
that matter.
I've had 409 take the paint and silkscreen right off of front panels.
I completely destroyed a triton IV using mr clean.
Mike, WB8VGE
SunLight Energy Systems
The Heathkit Shop
http://www.theheathkitshop.com/
J e e p
o|||||||o
Note: No trees were killed in the sending of this message, but a large
number of electrons were terribly inconvenienced
On Oct 12, 2009, at 12:13 PM, Dr. Gerald N. Johnson wrote:
On Mon, 2009-10-12 at 08:48 -0700, Marvin Haynes wrote:
> I recently bought a Triton IV at a hamfest. It appeared to be a
> basket case
> , with the faceplate stained yellow with tobacco tar. It is a
> restoration
> project in progress, but I have managed to get the receiver back to
> life.
> The PTO tunes well, but the dial pointer is stuck on the right side.
> Before
> I attempt to getting into the string, is there any Triton IV
> specific dial
> restring instructions out there on the internet?(like taking the
> faceplate
> off to get to the string). Also, the receiver has a loud AGC pop.
> I have read that this is a common problem, and there was a mod for
> this.
> The serial # for my radio is 01012. Was this a very early version of
> the radio? Any information would be appreciated.--Marvin, WB4OKM
>
I found a couple years ago that an industrial strength ammonia cleaner
from the hardware store was very effective at cleaning tobacco tar off a
radio front panel. It helped that this panel had been painted with epoxy
paint, I think. Others like 409 got the paper towel dirty but the panel
stayed yellow.
73, Jerry, K0CQ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|