TenTec
[Top] [All Lists]

Re: [TenTec] Information about chokes needed

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Information about chokes needed
From: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 19 Jan 2009 13:03:29 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I would only comment that any lightning protection must be done outside of 
the structure.  You do not want to provide a path for lightning to enter the 
house and then be dissipated.  This includes static build up from wind or 
snow blowing thus inducing static electricity on the antenna.

73
Bob, K4TAX


----- Original Message ----- 
From: "JAMES HANLON" <knjhanlon@msn.com>
To: <n3jbh@yahoo.com>; "Discussion of Ten-Tec Equipment" 
<tentec@contesting.com>
Sent: Monday, January 19, 2009 12:33 PM
Subject: Re: [TenTec] Information about chokes needed


> If you are using a balanced tuner that makes a DC connection between both 
> sides of the ladder line and the tuner coil, just center-tap the coil and 
> ground the center tap.  If you are using some other kind of tuner, look 
> for a point that makes DC connection to the feedline and that can be 
> grounded without disturbing the RF function.
>
> Jim, W8KGI
>  ----- Original Message ----- 
>  From: Jeff<mailto:n3jbh@yahoo.com>
>  To: tentec@contesting.com<mailto:tentec@contesting.com>
>  Sent: Sunday, January 18, 2009 5:52 PM
>  Subject: [TenTec] Information about chokes needed
>
>
>  Hello Folks i realize this is not a TenTec question and i am sorry about 
> that. Allthough i am a very proud Red dot owner. Any how here is my 
> question. I am preparing as we speak a doublet antenna and my first using 
> ladder line. I want to be able to drain stactic off the ladder line. I 
> have read many places RF Chokes work for this.
>
>  Being a Home brewer kind guy when i can be a want to wind my own, But i 
> can not find any good info on the project that tells the specific 
> information as to how many winds how how big a form etc etc, I asked this 
> questio once on another forum, got a bunch nonsesne. So i came here where 
> the real Pro's are. all replies will be most welcomed.
>
>  Oh and i need this for max 1500 watt power levels. Many thanks Jeff
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>