Hello All,
I've noticed the same WRT the AGC attack time too. I like Ron's list. I
would
also suggest getting the RFI out of the rear speaker output as well as the
key
jack. I have a 1 foot cable between the O II and my mixing board, with a
ferrite
on each end, as well as the center, and still get some RF back into the rig.
It would be really nice if the ALC attack and release were tailorable from
the menus.
Then the CW folks could tune for optimal key click suppression, and the SSB
folks
could tune for the best "envelope".
Has anyone noticed that even with the SP=off setting there still seems to be
some
"compression action" going on? I don't hear it through the monitor, but hear
it
if I listen to myself on a different rig. I key up and then hear a rush as
the background
noise sucks up??? I have the AGC off on the receiving rig.
Mike
N3EAQ
www.N3EAQ.net <http://www.n3eaq.net/>
>Bill: Have you mentioned this to Dits 'n Bits? I noticed the same problem
>with the 2.037j update, but increasing the hang time seemed to fix the
>problem.
>BTW...I have updated my "Fix List" for things that need to be fixed in
>future updates on http://n6ie.com/Wish%20List.htm and added:
>The "Talk Power" problem,
>VOX sensitivity
>PBT and BW in the band-stack registers
>A suggestion about encode rates (slow for CW, fast for SSB)
> Ron N6IE
> www.N6IE.com
>(Formerly N6AHA)
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|