TenTec
[Top] [All Lists]

[TenTec] ORION LOSS OF AUDIO PROBLEM > PA3ARM INPUT TO TEN TEC

To: <orion@contesting.com>, <tentec@contesting.com>
Subject: [TenTec] ORION LOSS OF AUDIO PROBLEM > PA3ARM INPUT TO TEN TEC
From: "Harry van Enckevort" <Harry.van.Enckevort@tiscali.nl>
Reply-to: tentec@contesting.com
Date: Mon, 12 Jul 2004 11:29:30 +0100
List-post: <mailto:tentec@contesting.com>
Gentlemen,

As asked for :

See mi input to TEN TEC disnbits.com hereafter: 

>>>>>>>>>>>>>
Gentlemen,
As asked for I want to (re) address mi audio issue as well. 
(spoke briefly/mentioned it  wid/to  Scott in Friedrichshafen)

-first version here 1.358 (sept 2003)> no problems wid audio
-upgraded from 1.358 to 1.367 > never lost audio in 1.367
-upgraded from 1.367 to 1.369 > first time I noticed loss of audio 
-1.369 useless (as far as loosing audio was concerned) so went back to
1.367 same day
-upgraded from 1.367 to 1.370 > only used a couple  of days  but hink
problem still there
-upgraded from 1.370 to 1.371 which I am using now; still loose (SUB)
audio occasionally but not as aften as in 1.369 so stick to 1.371;  
-no long contest after 1.367 which (agn) was bullet proof; so no
experience wid new firmware
-most of mi profiles are set up as diversity; have external keyer
connected to Acc jack (PTT) es paddle to KEY at the back from the be
beginning
-no amp ; only barefoot 

and yes I recognise below (from the reflector):

>>>>>>>I have, at times, also had the Sub Receiver start to generate a
loud 
buzz with no intelligible audio output. The RF portion appears to be 
working - at least the S meter looks right. The only way I have found 
out of this is a reboot. >>>>>>

>>>>>>>>>>>>>>>>>>>>>>>
73
de
Harry
PA3ARM@arrl.net




_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] ORION LOSS OF AUDIO PROBLEM > PA3ARM INPUT TO TEN TEC, Harry van Enckevort <=