TenTec
[Top] [All Lists]

Re: [RE: [RE: [TenTec] RFI and Orion ]]

To: <tentec@contesting.com>
Subject: Re: [RE: [RE: [TenTec] RFI and Orion ]]
From: Michael Goins <mgoins@usa.net>
Reply-to: tentec@contesting.com
Date: Thu, 22 Apr 2004 16:26:35 -0500
List-post: <mailto:tentec@contesting.com>
I have a real problem with the new house. I built a wall of amoires seperated
by a desk where I write (college prof/fiction writer). It also holds all the
gear on one of the shelves over my computer. 

It is on a wall with no windows (only windows are on the opposite wall,
ceiling to floor), so I am looking at probably drilling a hole through the
wall and brick outside to install a pvc pass-through tube. 

I have antenna problems with a very difficult neighbor (no radio problems,
yet), On top of that, I run 1 watt all the time, ssb, cw, and psk. 

I'm a proponent of the centerfed 44 or 88 foot dipole, although I am looking
at another multiband vertical dipole (had good results there in the past).
Have some ideas I want to try, but biggest problem at the moment is getting
the feedline through the wall and RF potential floating around. 



72,
mike
K5WMG
============================================================
HQRP MosQRPitos, FISTS #10403, QRP-L #2130, QRP-ARCI #3922 (former managing
editor, QRP Quarterly), TDXS #69, SOC #54, Flying Pigs #447, ARS #810, Alaska
QRP #514, Iowa QRP #163, QCWA #30857, RSGB #19119, originally licensed as
WB5YJX -One watt, all the time - SSB, CW, PSK, fixed or mobile
============================================================
Ten Tec Scout - SWL-30 - RM-40 - RM-20 - WM-20 - Ten Tec Argosy II


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>