TenTec
[Top] [All Lists]

[TenTec] Need help: Corsair II meter problem

To: <tentec@contesting.com>
Subject: [TenTec] Need help: Corsair II meter problem
From: gw7lhi@hotmail.com (Paul MW0CDO)
Date: Mon Jun 30 14:28:23 2003
Rob, maybe the switch broke as you were rotating it causing unwanted
connections.

This often happens with multiway wafer switches, even the completely
enclosed type.
My Omni V has an open wafer switch fitted for the meter selection.

If this is the case, either replace with similar or order from TT.. last
resort.. simply make the connections to provide the RX signal readings or
whichever is most important to you.

Won't take more than an hour to change it from taking covers off to
replacing covers if construction is anything like the Omni V.

Paul MW0CDO

----- Original Message ----- 
From: "Rob Atkinson, K5UJ" <k5uj@hotmail.com>
To: <tentec@contesting.com>
Cc: <k5uj@hotmail.com>
Sent: Monday, June 30, 2003 2:53 PM
Subject: [TenTec] Need help: Corsair II meter problem


> Hi everyone:
>
> I was operating my Corsair II in FD over the weekend (at home) & was
> switching the front panel multimeter around to check forward power, swr
and
> Ic.  I flipped the switch to Ic (was in receive mode) and the power supply
> tripped.  I turned off the rig, reset the p.s. and turned the rig back on.
> It seems to receive and tx okay (I went ahead and operated in field day
with
> it) but the meter is nonfunctional.  On rx it does nothing for signal
> levels.  On tx it's dead on tx power, and swr (was running cw so don't
know
> about processor but never use it anyway).  In receive, when I switch it
over
> to Ic the meter slams against the left side.  Has anyone had this happen?
> Any ideas on what the problem might be?
>
> Thanks & 73,
>
> Rob Atkinson
> K5UJ
> k5uj@hotmail.com
>
> _________________________________________________________________
> MSN 8 with e-mail virus protection service: 2 months FREE*
> http://join.msn.com/?page=features/virus
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
<Prev in Thread] Current Thread [Next in Thread>