TenTec
[Top] [All Lists]

[TenTec] New Computer Coming

To: <tentec@contesting.com>
Subject: [TenTec] New Computer Coming
From: n4lq@iglou.com (Steve Ellington)
Date: Fri, 4 Oct 2002 19:34:16 -0400
Files can be transferred but not applications. Any program that has been
"installed" must go through the "install" process all over again.

Steve Ellington N4LQ.
----- Original Message -----
From: "Jim Reid" <jimr.reid@verizon.net>
To: <tentec@contesting.com>
Sent: Thursday, October 03, 2002 7:12 PM
Subject: [TenTec] New Computer Coming


> Ok,  not sure this is the best place to ask,  but,
> I have a new machine on order from Gateway.
> Old unit is getting close to end of life,  and I want
> to replace it before some relay or the disk fails.
> Has happened to me twice in the past -- a few
> years ago,  so probably nearing that time again.
>
> Anyway,  I also have an external iOmega hard disk
> drive to which I can send everything on the present
> computer -- my N4PY Pegasus/RX-340 program,
> BeaconSee,  propagation predictors, Logic 6 logging
> program, and all else,  including Norton's System
> Works 2002.  My present computer does have
> the earliest of USB ports,  and that is what the iOmega
> is connected to.
>
> Now,  can I just connect this external drive to an input
> port on the new computer and feed in all my applications?
> The coming new machine has the newer,  faster Type 2
> USB ports,  so ought to read in the applications on this
> external back-up drive just fine,  I hope!
>
> Yes,  I know I must install the iOmega software for this
> external drive on the new computer;  but would be a big
> problem to re-load all the other applications on the present
> machine -- don't even have most of the software,  as the
> programs were downloads from various net sites.
>
> Also,  many of my  "Favorites" list on the present IE browser
> I am sure have included "cookies" on my drive and various
> passwords are "remembered";  would these also be correctly
> transferred to the new machine?
>
> Bunch of questions,  hope this method described will be
> a straight forward way to get the whole new machine up
> and running and correctly set up to move right on from
> where I leave off with the old computer.  New unit
> should be out here to Kauai by mid-next week.
>
> 73,  Jim  KH7M
>
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>


<Prev in Thread] Current Thread [Next in Thread>